Jump to content
SAU Community

Recommended Posts

Returned my car to stock recently and heres what i have for sale. 

Ill post pic of what i have on my and if a part isnt shown then pm me with mobile number and ill mms a pic. 

I dont get on here often so contac via pm and i will reply promptly with mobile contact number.    

No Lowballers please, Unless you have genuine interest please stay away from my thread, Also Not interested in trades for anything. 

Thanks

1. 300Km/Hr Cluster (Late R32 GTR) $400 (Still on car Photos on Request) 

2. Adjustable FPR w/Guage $160 SOLD

c273838b.jpg

3. Bee-R Rev Limiter $300

663880ab.jpg

4. Cusco Adjustable Rear Camber Arms Pair (Suit R32 GTS4/GTST/GTR & S13/180SX) $140

56894978.jpg

5. GREX(GREDDY) Oil Filter & Remote Oil Cooler Sandwich Plate Adaptor w/Built In Thermostat $120   

f8a84a91.jpg

  

6. HKS Hiper-Damper II 30 Way Height & Dampening Adjustable Coilovers w/Pillow Ball Tops/Helper Springs/C Spanners/Dampening Adustment Tool (Suit R32GTSt) $1100

HKS Hiper-Damper II coilovers - dampening and rebound can be adjusted simultaneously in 30 different increments to deliver the desired shock compression and rebound stiffness. Ride height is adjusted by simply rotating the 60mm spring retainer perches around the chromed steel shock body. The dual interlocking spring retainer perches prevent spring movement and unwanted ride height changes.

The included anodized aluminum upper pillowball mounts improve traction and steering response while maintaining suspension geometry.

28bdbb6d.jpg

7. R32 GTR Alluminum Bonnet Black $550 

(Still on car Photos on Request)  

8. R32 GTR Alluminum Guards Black w/Indicators $650

(Still on car Photos on Request) 

9. R32 GTR Front Bar Black w/Lip $460'

(Still on car Photos on Request) 

10. RB20DET 5sp Manual ECU (Factory Reset) $150

8624c85b.jpg

11. RB25DET S2 Head Complete (Minus Cams/Coil Pack Cover) $400

b1b43f14.jpg 1c6804c1.jpg

12. RB25 Exh Manifold w/Heat Shield $60 

cf4dd484.jpg

13. RB25 Intake Manifold w/Throttle Body/TPS Sensor/AAC Valve/Idle Valve/Temp Sensors etc $160

13d06583.jpg 0eda2168.jpg   

14. SARD 550cc Sidefeed Injectors x6 w/Rail/Plugs/Collars/Harness/FPR Adaptor (Suit RB25 DET S1 & S2) $700

22b14e15.jpg 5419fd55.jpg a79b46c0.jpg 7493cc1f.jpg 700ac5b9.jpg

15. Splitfire Coikpacks DIS-005 $430

f541b52a.jpg 

16. Tomei Poncams Suit RB25 s1&s2 with Metal CAS $700

(Currently Still In The Head Sale Above Buy Both for $1000)

17. RB20/25 Mild Steel Bell Mouth Turbo Dump/Front Pipe 4" into 3" $90

a3c900c2.jpg

Also Have:

18. RB20DET Long motor w/BHG $250 Pick up (No Turbo/Ancillaries/Coils/Wiring/Cas)

aa4b19d3.jpg

Edited by krayzie32
please pm best price this week for camber arms for gts4 posted to kingsthorpe QLD 4400 genuine interest. sorry cant pm not enough posts as yet... or 0404978150

hey mate $140 delivered for now

sms sent also

Best price on the r32 Ecu delivered to SA??

Please pm me in case I don't re check this thread

hey mate can do $150 express post

pm sent also

hi can u do $80 and i pick up anytime

hey mate can do $80 pick up and you can pick up tomoro if you so desire

pm sent

Edited by krayzie32

15. Splitfire Coikpacks DIS-005 $430 Deposit taken

17. RB20/25 Mild Steel Bell Mouth Turbo Dump/Front Pipe 4" into 3" $90 sold & picked up

^ scotty nm35: pm replied.

All items below are sold and delivered

1. 300Km/Hr Cluster (Late R32 GTR) $400  SOLD

2. Adjustable FPR w/Guage $160 SOLD

4. Cusco Adjustable Rear Camber Arms Pair (Suit R32 GTS4/GTST/GTR & S13/180SX) $140 SOLD     

14. SARD 550cc Sidefeed Injectors x6 w/Rail/Plugs/Collars/Harness/FPR Adaptor (Suit RB25 DET S1 & S2) $700 SOLD

15. Splitfire Coikpacks DIS-005 $430 SOLD

Feel free to make fair offers can send most items at buyers expense

Edited by krayzie32

9. R32 GTR Front Bar Black w/Lip $460' SOLD

EVERYTHING LISTED BELOWIS SOLD AND DELIVERED:

1. 300Km/Hr Cluster (Late R32 GTR) $400 SOLD

2. Adjustable FPR w/Guage $160 SOLD

4. Cusco Adjustable Rear Camber Arms Pair (Suit R32 GTS4/GTST/GTR & S13/180SX) $140 SOLD     

5. GREX(GREDDY) Oil Filter & Remote Oil Cooler Sandwich Plate Adaptor w/Built In Thermostat $120 SOLD

9. R32 GTR Front Bar Black w/Lip $460' SOLD

11. RB25DET S2 Head Complete (Minus Cams/Coil Pack Cover) $400 SOLD

14. SARD 550cc Sidefeed Injectors x6 w/Rail/Plugs/Collars/Harness/FPR Adaptor (Suit RB25 DET S1 & S2) $700 SOLD

15. Splitfire Coikpacks DIS-005 $430 SOLD

Still plenty of stuff guys

Feel free to contact me via this thread, or p.m. and ill get back to you as soon as possible.

Also contemplating to part with:

Oct 97" Series 2 RB25 5 Spd Box is perfect condition

Nismo Unspung centre Coppermax Clutch kit with nismo lighweight flywheel

Hardie Spicer 1 Pc Custom Lightweight Balanced Tailshaft to Suit RB25 5 Speed Box in R32 GTSt Factory Manual

S2 RB25DET Loom & Ecu to suit plug and play adaptation to R32 GTSt Factory Manual

R33 Std ECU + Z32 + HKS F-Con SZ & Loom to suit HCR32&ECR33

R32 GTSt Factory Manual Type M (sunroof) complete rolling shell

at the moment the above is an expression of interest as ive lost interest in this neverending rollercoaster :)

highly recommend this seller, i purchased the s2 head and it arrived very promptly and he always kept me updated.

great guy, he goes out of his way to be helpful.

thanks again Tim

regards

gezza

highly recommend this seller, i purchased the s2 head and it arrived very promptly and he always kept me updated.

great guy, he goes out of his way to be helpful.

thanks again Tim

regards

gezza

thanks for the kind comment gezza

hope everything goes well with your build mate...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...