Jump to content
SAU Community

R32gtr 1990 Very Cheap Registered $6,000

NISSANGTS

By NISSANGTS,
in Tasmania

 Share

Recommended Posts

NISSANGTS Mentor

NISSANGTS

Posted
Posted (edited)

up for sale is a genuine r32 gtr gunmetal grey and this car is very very cheap but does have a few issues

The car is complete and registered

Every thing in the car works

The rear shocks are biltsein and the front are kyb

All springs are hks units [similar to tein]

gear box has been rebuilt with a resonable clutch

the engine dosn,t start on cranking but did on tow start

I want $6000.00

Issues are

the engine has 90 psi per cyclinder all 6 of them

Body straight was silver is now gunmetal grey

some small pieces of rust around rear wheel arches [no rust in stuctural areas or rest of body]

A few small scratches around body with a fist indent in bonnett

All the tyres are down to and past wear markers

The driveers seat bulster is torn and a pillar garnish has holes in it.

The drivers side cv boot is torn

aircon doesn't work but is all theere [needs reconecting and gas]

I am not interested in swops or low ball offers

Stuart 0409135950

Edited by NISSANGTS
NISSANGTS Mentor

NISSANGTS

Posted
  • Author
Posted

Hi kyle

Yes mate like i said it is a complete r32 gtr with issues

and yes i do have pic's but you would be better looking at in person.

Ther is already 2 people comming to look at tomorrow night

stuart

NISSANGTS Mentor

NISSANGTS

Posted
  • Author
Posted

GTR IS SOLD

Thanks to bodie for being so reliable and doing things straight away.

Thanks to mat and his wife for also being on time last night [sorry guys bodie did get in first]

Will see you tonight with rims.

stuart

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • Kinkstaah
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Kinkstaah · Posted

      You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • Dose Pipe Sutututu
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Dose Pipe Sutututu · Posted

      LOL.... you are correct there.
×
×
  • Create New...