Jump to content
SAU Community

Recommended Posts

26 views no replies. I'm not sure how to take that. Surely someone has or has heard of Stillen.

Everybody has heard of Stillen, I just assume nobody has an opinion on that piece.

I have used a willall midpipe and catback and now a custom 4 inch with a magnaflow muffler. I have heard of guys on this forum using willall, hks, challenge and Greddy. Maybe there are others but I have not heard of anyone using the stillen system. Most people know of stillen but it isn't exactly the first choice of many people outside the USA. If you want feedback on the stillen product, try the NAGTROC.org forum

Why the stillen system over the many others?

I have used a willall midpipe and catback and now a custom 4 inch with a magnaflow muffler. I have heard of guys on this forum using willall, hks, challenge and Greddy. Maybe there are others but I have not heard of anyone using the stillen system. Most people know of stillen but it isn't exactly the first choice of many people outside the USA. If you want feedback on the stillen product, try the NAGTROC.org forum

Why the stillen system over the many others?

Stillen was recommended by a bloke from Tassie who was at the drive day. I did some research and decided Stillen was the go. (Thats why i was after comments from anyone else that may have used Stillen).

Anyway I have bitten the bullet now. Stillen pipes on the way via Fed Ex. Should have by end of week and installed by weekend. I will post before and after vids if I can work out how too.

Stillen was recommended by a bloke from Tassie who was at the drive day. I did some research and decided Stillen was the go. (Thats why i was after comments from anyone else that may have used Stillen).

Anyway I have bitten the bullet now. Stillen pipes on the way via Fed Ex. Should have by end of week and installed by weekend. I will post before and after vids if I can work out how too.

upload video to youtube then paste linky in here, done. :(

Done. Sounds friggin awesome. Particularly under load and change down. Havn't had a chance to really punt it yet so not sure if any noticable addition to grunt.

Will try and organise vid over weekend.

Good to see you are enjoying your new midpipe! Does it drone at highway speeds at all?

Slight drone at low throttle under load but very bearable. Drone dissipates as revs increase and completely non audible on decel.

Sounds bloody awsome on start up (particularly when cold) and settles into a nice burble on steady idle. But oh the sound under heavy acceleration (gives me a chubby just thinking about it).

Will post a vid in the next couple of days (have recorded it...just need to work out how to load on pc, edit and upload).

  • 1 month later...
Stillen was recommended by a bloke from Tassie who was at the drive day. I did some research and decided Stillen was the go. (Thats why i was after comments from anyone else that may have used Stillen).

Anyway I have bitten the bullet now. Stillen pipes on the way via Fed Ex. Should have by end of week and installed by weekend. I will post before and after vids if I can work out how too.

Where did you order the Stillen from if you don't mind me asking ? What was cost including freight ?

Matt

Where did you order the Stillen from if you don't mind me asking ? What was cost including freight ?

Matt

Ordered direct from Stillen in the states (through there website). All up including freight for exhaust and midpipe was about $3,500 aus dollars but i think Stillen has dropped there price since. Speak to Sean (see his reply above in this post) if you are interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...