Jump to content
SAU Community

Recommended Posts

Anyone had a gearbox rebuilt locally and if so by whom, any bad experiences pm me. I am thinking of talking to southern differentials. As i have had work done there.

Car has a stuffed transfer case at the moment, and the gearbox isn't the greatest, so thinking of a rebuild or perhaps going to an r33 gtr gearbox. Also does anyone know of any rebuild kits out there?

Link to comment
https://www.sau.com.au/forums/topic/329680-gearbox-rebuild/
Share on other sites

I currently have an R33 GTR gearbox in mine. Second is a bit crunchy. I'll be rebuilding this box at some stage with the OS Giken kit and maybe a hollinger shaft. Interested in this, I haven't decided who will do this for me yet.

Link to comment
https://www.sau.com.au/forums/topic/329680-gearbox-rebuild/#findComment-5356558
Share on other sites

Yeah saw it there yesterday, Just saw somone pull up in a 4wd and trailer and saw this thread...put them together...but alas I was wrong,

As Blitzxtr prob said, Award Diff and Gearbox have runs on the board but they are a fair hike from Canberra.

Link to comment
https://www.sau.com.au/forums/topic/329680-gearbox-rebuild/#findComment-5356660
Share on other sites

Yeah saw it there yesterday, Just saw somone pull up in a 4wd and trailer and saw this thread...put them together...but alas I was wrong,

As Blitzxtr prob said, Award Diff and Gearbox have runs on the board but they are a fair hike from Canberra.

yeah Terry reuilds these things in between spoonfuls of weetbix during breakfast. He did the PPG helical dog in my car and its mint. He also knows just what bits need ordering when doing OS conversions as the bits required are not always the same. This seems an issue with other shops doing OS boxes, handing the customer a notchy noisy box and telling the customer that its noisy and notchy due to the gearset. OS gearsets when installed correctly using the right list of update parts do not whine or are notchy, they shouldn't even be able to pick it from a stocker.

He also does transfer cases.

Edited by blitzxtr
Link to comment
https://www.sau.com.au/forums/topic/329680-gearbox-rebuild/#findComment-5356707
Share on other sites

Well Ive decided I will be getting the box rebuilt at award when the parts come in, just a standard rebuild to r33 specs. In the scheme of things it's not that much more expensive than getting a 2nd hand gtr box, which is a bit of a lottery. The local places don't seem to have the experience with these boxes that Terry has.

Link to comment
https://www.sau.com.au/forums/topic/329680-gearbox-rebuild/#findComment-5368591
Share on other sites

about 1400$ in parts plus labour of taking the box out and rebuilding it.

replacing:

input shaft, 2nd synchro ring, 3rd synchro ring, 4th synchro ring, 1st/2nd selector sleeve, 3rd, 4th selector sleeve, 3rd/4th selector hub,

Energiser springs & pads for 1st/2nd/3rd/4th

Link to comment
https://www.sau.com.au/forums/topic/329680-gearbox-rebuild/#findComment-5368914
Share on other sites

  • 5 weeks later...

Well have the car back now, and overall happy. A few things though, be prepared for a few weeks without the car just incase. Due to the wrong parts being delivered twice by nissan, my job took 2 and a half weeks. Box overall feels nice and smooth, does feel a bit different to shift than other r32 boxes ive tried. I think this might be due to the hks short shifter in the car, would be interested in seeing what another box with a short shifter feels like. Finally got rid of my bearing noise as well.

p.s don't let your transfer case run out of oil lol, thats what happened to mine, i feel retarded.

Link to comment
https://www.sau.com.au/forums/topic/329680-gearbox-rebuild/#findComment-5423390
Share on other sites

Hey Chris,

You can have a drive of mine one day soon, I have a TOMEI short shifter in my RB25 box... Should be a good comparison, although my box isnt exactly new. :)

Don't necessarily have to drive it, just want to check the throw and the feel compared to mine, even just going through the gears when the car is off I can tell the feel is different to a normal shifter. Happy to let you test drive mine if you want in return.

Link to comment
https://www.sau.com.au/forums/topic/329680-gearbox-rebuild/#findComment-5427393
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...