Jump to content
SAU Community

Recommended Posts

We got a rear accident r33 gtr at sheen on city rd. So far they have been idiots as they ordered the rear bar in the day we dropped it off. Now it will take a month to come in. Only complaint so far. But all will be forgotten when i see they have done a good job

most panelshops order parts when the car gets dropped off, not before incase they lose the job then are out of pocket on parts

if it was a ADM car then parts would take a few days, but cause its a gtr you have to wait...... its not the shops fault, its how its always done

No offense, but i think in my opinion if you want a very good job, go to a place that deals with prestige cars.

Charlie Battisti in Nunawading is one of them. Recommended repairer for Porsches, VWs, BMWs, Mercs

Correct Accident in North Melbourne does jobs for Melbourne city Lexus. I have a friend with an IS250 who went there, had his panels resprayed..you can't tell the difference at all.

If you're after a place that specialize in exotic/expensive cars go see Graeme at Mr Gloss, they do alot of work on BMWs,Mercedes and lamborghinis

Address:Kilpa Road

Moorabbin, VIC, 3189

Telephone: 03 9555 5971

Batisti over Gloss........ just saying... :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...