Jump to content
SAU Community

Is My Catch Can Set Up Right?

ClutchBurndout-:(

By ClutchBurndout-:(,
in General Maintenance

 Share

Recommended Posts

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
Posted

hey all, installed a catch can over the weekend, just want to make sure its right, because when i was driving home the other day my car seemed to nearly stall for a second and i thought that i have installed the can wrong. for the record i got a catch can with the air filter, so the engine can breath.

catch.jpg

Link to comment
https://www.sau.com.au/forums/topic/330356-is-my-catch-can-set-up-right/
Share on other sites
blind_elk Grand Master

blind_elk

Posted
Posted
after some research last night i changed my setup, how does this look now?

catch-1.jpg

It's supposed to be a "closed" system. The first option is open to atmosphere, which contributes to the "almost stalling" you encountered.

The second option is the way I have installed mine. But unblock the PCV hose (between valley and plenum).

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted
It's supposed to be a "closed" system. The first option is open to atmosphere, which contributes to the "almost stalling" you encountered.

The second option is the way I have installed mine. But unblock the PCV hose (between valley and plenum).

how come i need to unblock the hose? wouldnt this ruin the whole setup? as the fumes would still get into the intake?

blind_elk Grand Master

blind_elk

Posted
Posted

The PCV valve in the plenum only opens under high vacuum, positive pressure jams it shut. The PCV valve is basically only open during "closed throttle", and the minimal amount of oil vapour that might be ingested isn't a problem for the engine.

The problem is when oil fumes are taken from the rocker covers and circulated back through the inlet side of the turbo. The oil (vapour) mixing with the fuel and air severely lowers the effective octane rating of the "fuel", which can cause the mixture to detonate. It won't detonate at effectively idle (throttle closed). The catch can is designed to condense the vapours so they don't reach the inlet side of the turbo.

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted
The PCV valve in the plenum only opens under high vacuum, positive pressure jams it shut. The PCV valve is basically only open during "closed throttle", and the minimal amount of oil vapour that might be ingested isn't a problem for the engine.

The problem is when oil fumes are taken from the rocker covers and circulated back through the inlet side of the turbo. The oil (vapour) mixing with the fuel and air severely lowers the effective octane rating of the "fuel", which can cause the mixture to detonate. It won't detonate at effectively idle (throttle closed). The catch can is designed to condense the vapours so they don't reach the inlet side of the turbo.

so if i keep it blocked, whats the cons of that? cos id like to keep even the small amount of fumes out of there... or is there something very wrong with having it blocked?

ta

pipster11 Grand Master

pipster11

Posted
Posted

nissan did lots of research and put the pvc valve there

as did lots of other manufacturers

2nd setup looks right, but unblock the pcv, it does things at idle and light throttle but sfa on boost when your getting the most blowby

get some steel wool and put it in your catch can (making sure that non is gonna come off and go into the turbo)

the fine wool will catch the fine oil droplets, thus making the catch can more effective

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted
nissan did lots of research and put the pvc valve there

as did lots of other manufacturers

2nd setup looks right, but unblock the pcv, it does things at idle and light throttle but sfa on boost when your getting the most blowby

get some steel wool and put it in your catch can (making sure that non is gonna come off and go into the turbo)

the fine wool will catch the fine oil droplets, thus making the catch can more effective

ok cheers, will look into the steel wool, and unblock the pipe, im gonna have to get some new pipe though since theres no way i getting the ball out lol

gotRICE? Veteran

gotRICE?

Posted
Posted

To me it looks like the 2nd pic that you have actually completely sealed off the cam covers from breathing at all.

Without the PCV or the breather to the intake pipe wouldnt the crank case pressure get rather high? As it has nowhere to go.

blind_elk Grand Master

blind_elk

Posted
Posted
To me it looks like the 2nd pic that you have actually completely sealed off the cam covers from breathing at all.
Not at all. The piece marked "PVC line" is the pipe back down to the turbo intake.

Basically all that has happenbed that a can has been inserted between the LHS rocker cover and the turbo intake.

gotRICE? Veteran

gotRICE?

Posted
Posted (edited)

Ahhhh i see! Makes sense now, it just looked like it had a block in it with that grey circle :D If the intake pipe was there, then i would have understood!

And i would have called it differently, as people generally relate "PCV" to the line between the intake cam cover and the IM that actually has the valve in it. The turbo breather hose just has a little brass restrictor :)

Makes complete sense now!

Im thinking of modding my setup due to other issues i encountered, like below. (3rd line closest to radiator is "MS Paint'ed" on.)

Deleted breather filter, and PCV as per factory.

CanPossible.jpg

Edited by gotRICE?
08yannch Rising Star

08yannch

Posted
Posted

i have heard about ppl putting a compressor water separator between the plenum and the rocker cover to filter out oil on that side and a catch can set up (like above) to filter out oil vapor on the other side. maybe something to look into ?

but the second set up look good just remove the ball bearing

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted

why is everyone saying my setup is only venting the LHS valley cover? i have both valleys connected to one hose, then to the catch can, is this correct? both my valleys are going to the catch can correctly?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • bilbo117
      R34 GTR Seats / No longer reclining

      By bilbo117 · Posted

      Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • GTSBoy
      Best place to order Authetic R32 Parts in Japan

      By GTSBoy · Posted

      I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...