Jump to content
SAU Community

Pull/push Convertors

muchogarcia34

By muchogarcia34,
in Western Australia

 Share

Recommended Posts

muchogarcia34 Collaborator

muchogarcia34

Posted
Posted

Hey guys, to make a long story short I bought the wrong clutch for my R34 GTT. Got a push instead of a pull!!!!!

So my question is where can you get pull/push convertors from? Are they any good? And how much?

I have it for sale but if I can't sell it I'll go down this road, I'm just nervous about using convertors, don't know much about them or if they're any good. If anyone can shed some light that would be great :D

Cheers

Daniel

Link to comment
https://www.sau.com.au/forums/topic/330446-pullpush-convertors/
Share on other sites
muchogarcia34 Collaborator

muchogarcia34

Posted
  • Author
Posted

I've heard of them before but never seen one. I bought it off a dude over east, so I can't return it because it was a while ago. Basically he assured me that it was a pull type and that he had it on his R34 GTT............... but once installed it is clearly a push.....

Deano45 Rising Star

Deano45

Posted
Posted
Buy a pull type cover :)

Or swap the clutch fork and slave cylinder over to push type. Should be cheaper than a converter.

I've done this on a GTR box and used the parts from an RB25 box, So I can't see why it wouldn't work on your one.

Keep away from the converters unless it is specifically made for that clutch. Been down that road already with an OS Giken pull to push converter. Had one for my OS clutch but when I changed to the NPC it wouldn't clear.

ash_29 Enthusiast

ash_29

Posted
Posted (edited)

Depends on the clutch, i know for a fact that OS Giiken clutches require an OS pull to push convertor approx $300. Let me know if you have an OS clutch and maybe we can work something out as i have one that is brand new. If this isn't the case and you can't be bothered messing around, i would think about selling the clutch and then just buying a pull style clutch.

Edited by ash_29
muchogarcia34 Collaborator

muchogarcia34

Posted
  • Author
Posted
Depends on the clutch, i know for a fact that OS Giiken clutches require an OS pull to push convertor approx $300. Let me know if you have an OS clutch and maybe we can work something out as i have one that is brand new. If this isn't the case and you can't be bothered messing around, i would think about selling the clutch and then just buying a pull style clutch.

It's a Nismo clutch........ But I've worked out what I'm gonna do, I think...... I hope.... :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

      Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Yeah the rule of thumb with an LS is 7psi per 1000rpm. That is decidedly not enough at 6800rpm. I mainly looked for the scenarios where knock started to be picked up and it was later in the session when things were hotter, and oil was thinner, and the pressure was lower than it should be. (i.e very horrible). I am hoping with thicker oil (I was running Penrite ten tenths 10-40, the manual specifies 10-30) that does not leak that it's much improved at that time!!! I am using Project Mu Club Racer CR pads. I'm also using the Project Mu 335C fluid. The symptoms imply that it was fluid that boiled, but no bubbles seemed pretty weird to me when I bled it today. I want to try Castrol SRF as it has a much higher wet temp but, well, I have new Project Mu fluid lol... so I should at least use that. The pedal on track was really noticable. It went from basically normal feeling to instantly near-floor. The car did pull up as before, it was just very much nearly at the floor before the brakes engaged. At that point I pretty much decided the day was very done, it did *kinda* come back during that very slow cooldown lap into the pits. Felt perfectly fine driving home.
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      f**king around with the bro
×
×
  • Create New...