Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just decided to try and clean out my garage in hope of fitting a car back in there one of these days. Below are pictures of each of the items; feel free to ask any questions. I can be contacted via PM, I'm on here most days and will generally reply fairly quickly. Feel free to make offers, you never know!

R33 Genuine Nissan Underbody Plastic - First one i've seen - $40

R33 Standard Front and Rear Swaybars (with rubbers) - $40 for both or $25 each

R33 Open 6 Bolt R200 Diff (4.11 Ratio) - $60

R33 Drive Shafts (6 Bolt to suit above diff) - $40 for both

R33 Washer Bottle (unsure if motors work) - $15

R33 Series 2 Passenger Light (needs to be resealed, cover was taken off for cleaning. Plastic cover has small crack, not visible from front.) - $80

Apexi Boost Gauge 60mm (Fake?) - $30

R33 Stock Suspension Front and Rear (Average Condition) - $50 for all of it

Diff Back Exhaust (Good for Compliance) - $40

R33 Standard Dump / Front Pipe - $30

Standard RB25DET Cams - $40

R33 Maroon Boot Lid (No Spoiler, Lock or Hinges) - $30

T Sport Boost Gauge 52mm (All wiring and boost line Included) - $40

R33 Series 1 Manual ECU - $60

6 x R33 Series 2 Coilpacks (All working when removed) - $80

Pod filter Adaptor (Suit Standard afm?) - $15

Custom PWR Radiator (Thick core, looks mint) - $450

Decided to stick with my standard radiator. Side panels make it easy to mount. Comes with Thermo Fan as shown in pictures. Dimensions of the Radiator are 400 High, 550 Wide to Sidetanks, 700 Wide to Panels and around 60 Thick as pictured.

All of the parts can be picked up from the Gold Coast (Robina Area) or I can post at buyers expense.

Mic

post-57177-1280148390_thumb.jpg

post-57177-1280148440_thumb.jpg

post-57177-1280148460_thumb.jpg

post-57177-1280148469_thumb.jpg

post-57177-1280148483_thumb.jpg

post-57177-1280148497_thumb.jpg

post-57177-1280148511_thumb.jpg

post-57177-1280148526_thumb.jpg

post-57177-1280148541_thumb.jpg

post-57177-1280148557_thumb.jpg

post-57177-1280148570_thumb.jpg

post-57177-1280148587_thumb.jpg

post-57177-1280148604_thumb.jpg

post-57177-1280148618_thumb.jpg

post-57177-1280148632_thumb.jpg

post-57177-1280148646_thumb.jpg

post-57177-1280148657_thumb.jpg

post-57177-1280148667_thumb.jpg

post-57177-1280148681_thumb.jpg

post-57177-1280148692_thumb.jpg

post-57177-1280148705_thumb.jpg

post-57177-1280148722_thumb.jpg

post-57177-1280148733_thumb.jpg

post-57177-1280148745_thumb.jpg

post-57177-1280148760_thumb.jpg

post-57177-1280148777_thumb.jpg

post-57177-1280148791_thumb.jpg

post-57177-1280148806_thumb.jpg

post-57177-1280148820_thumb.jpg

post-57177-1280148832_thumb.jpg

post-57177-1280148845_thumb.jpg

Edited by Binofski
can you tell me what the thing in the middle of the right hand side end tank of the radiator is? is it a sensor mount or something? and how much use has it had?

The thing in the middle of the right hand side is just another barb which could be used as a spot for a sensor, or simply left with the rubber bung on it. I've attached some pics to give you a better look at it. It was used by the original owner for a few dyno runs while he was tuning, but he replaced it with a thinner saber one which suited him better. So I would say a few weeks use max. Thing comes up like a mirror after a polish.

Mic

post-57177-1280185211_thumb.jpg

post-57177-1280185232_thumb.jpg

Edited by Binofski
  • 2 weeks later...
ill buy the headlight if u can put the cover on for me?

Hey Mate,

I'll take a look at it today and ill get back to you about it. Gotta see if I have sikaflex to put it back together with.

Mic

  • 4 weeks later...
  • 2 weeks later...

Bump

Also for sale Splitfire coilpacks to suit series 2 RB25DET - $400

Headlight is still here, as is PWR radiator

Apexi Boost Gauge now sold.

Cheers,

Mic

Edited by Binofski
Hey Guys,

Just decided to try and clean out my garage in hope of fitting a car back in there one of these days. Below are pictures of each of the items; feel free to ask any questions. I can be contacted via PM, I'm on here most days and will generally reply fairly quickly. Feel free to make offers, you never know!

R33 Genuine Nissan Underbody Plastic - First one i've seen - $40

R33 Standard Front and Rear Swaybars (with rubbers) - $40 for both or $25 each

R33 Open 6 Bolt R200 Diff (4.11 Ratio) - $60

R33 Drive Shafts (6 Bolt to suit above diff) - $40 for both

R33 Washer Bottle (unsure if motors work) - $15

R33 Series 2 Passenger Light (needs to be resealed, cover was taken off for cleaning. Plastic cover has small crack, not visible from front.) - SOLD SOLD SOLD

Apexi Boost Gauge 60mm (Fake?) - SOLD SOLD SOLD

R33 Stock Suspension Front and Rear (Average Condition) - $50 for all of it

Diff Back Exhaust (Good for Compliance) - $40

R33 Standard Dump / Front Pipe - $30

Standard RB25DET Cams - $40

R33 Maroon Boot Lid (No Spoiler, Lock or Hinges) - $30

T Sport Boost Gauge 52mm (All wiring and boost line Included) - $40

R33 Series 1 Manual ECU - SOLD SOLD SOLD

6 x R33 Series 2 Coilpacks (All working when removed) - $80 - Still HERE!

Pod filter Adaptor (Suit Standard afm?) - SOLD SOLD SOLD

Custom PWR Radiator (Thick core, looks mint) - $450

Decided to stick with my standard radiator. Side panels make it easy to mount. Comes with Thermo Fan as shown in pictures. Dimensions of the Radiator are 400 High, 550 Wide to Sidetanks, 700 Wide to Panels and around 60 Thick as pictured.

All of the parts can be picked up from the Gold Coast (Robina Area) or I can post at buyers expense.

Mic

Series 2 Splitfire Coilpacks - $400 in original Box!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...