Jump to content
SAU Community

Recommended Posts

Hey guys,

After some deliberation, I've chosen to go down the path of highflowing my stock RB25 turbo, as it will provide with very acceptable results with minimal cost...yeah financial forecasting changed slightly, so much for a 3076R :)

What I'm after, is some space at someone's place to remove the turbo two weekends next month, any day except for the 7th (skidpan). This space would be preferred under cover, but if the weather is fine, it doesnt matter if it's outside.

Once the turbo is removed, I'll be posting it to Hypergear for the upgrade. While the turbo is away, I will also need to leave the car at your place, but we can push it to wherever (off-street is fine, unless it's guaranteed to get broken into lol)

When it gets back to me, we'll stick it back on and be out of your hair.

I am more than happy to make this up to you in any form of currency, be it legal tender $$$, or a case etc etc. You only need to provide the space - NOT the tools etc (so don't worry, we won't break your shit)

It will be myself and Randon_I_am doing the work, so you needn't worry about having dodgy people on your property...we're trustworthy! :/

Please call me on 02 6211 5724 during business hours, 0431 391 359 any other time, or reply/PM on here. Using these methods, I'm contactable 24/7.

THANKS :P

Link to comment
https://www.sau.com.au/forums/topic/330813-want-to-rent-garage-space/
Share on other sites

PFC? I'm not gay :/ ViPEC v44 brah

umm, I'm unsure. injectors means it isn't drivable, and will need to be towed to ESP. whereas if I pay them to do the injectors, I can still baby it there. Also, Glenn recommended against doing the side feed injectors myself, as there's apparently a particular screw I'll more than likely...screw.

Depends how easily we could do them, I'll grab them at the same time as the turbo so if it's easy I could save some more money getting it towed rather than getting them to do it?

but i got a .82 rear whats the stock 33 rear < .63 i think?

i got a xforce ebay special, turbo back with apparently xforce highflow cat. just put on one of those Varex mufflers (twin tip) and it made it a lot quieter, even with the valve open!

hahahaha.

OK shell close this thread or delete it, I've found somewhere to do it.

Also, Pat, I got a reply from Stao. $1350 = my compressor housing, $1450 = his. You paid for his, which is what I'm gonna do. Then next sunday do the swap :D

Thanks for the offer tho Eiji, all good :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...