Jump to content
SAU Community

Recommended Posts

Hello Nissan men and women.

I've got an old PC I'm trying to ressurect so I can get my albums and porn off her.

When I turn on said PC, I get a short pause, then I get a beep, 3 seconds long or so. Then a 3/4 second silence, then another 3 second beep and so on.

Does this beep mean a fault code like a f*kn car ecu?

IIRC (I dont currently have a monitor hooked up) with a screen hooked up I get no visuals, cant remember if the monitor goes off stand by or not when this happens, i THINK it did, Ill be trying this soon.

PC is an AMD pentium 1.6 equiv or similer. pretty much dead standard no cool graphics cards or anything.

PS. I un hooked the power switch (on/off switch) and tried another because I couldnt even get it to turn on. changing the switch fixes this. I was gonna change the power supply but thought I'd try that first.

Thank you for your time.

-Dale

Hello Nissan men and women.

I've got an old PC I'm trying to ressurect so I can get my albums and porn off her.

When I turn on said PC, I get a short pause, then I get a beep, 3 seconds long or so. Then a 3/4 second silence, then another 3 second beep and so on.

Does this beep mean a fault code like a f*kn car ecu?

IIRC (I dont currently have a monitor hooked up) with a screen hooked up I get no visuals, cant remember if the monitor goes off stand by or not when this happens, i THINK it did, Ill be trying this soon.

PC is an AMD pentium 1.6 equiv or similer. pretty much dead standard no cool graphics cards or anything.

PS. I un hooked the power switch (on/off switch) and tried another because I couldnt even get it to turn on. changing the switch fixes this. I was gonna change the power supply but thought I'd try that first.

Thank you for your time.

-Dale

Depends on your BIOS as to what the beeps are. As far as I remember the long ~3 sec beep was related to either a loose video card, or loose RAM. If reseating them doesnt work, you can try resetting the BIOS with the CMOS reset jumper (requires new BIOS setup, if you don't understand, don't do it yourself). If that still doesn't fix it, you have either some dead parts and/or a bad power supply.

I suggest, if you have another computer, put your HDD into it and get your music and porn off it that way.

Depends on your BIOS as to what the beeps are. As far as I remember the long ~3 sec beep was related to either a loose video card, or loose RAM. If reseating them doesnt work, you can try resetting the BIOS with the CMOS reset jumper (requires new BIOS setup, if you don't understand, don't do it yourself). If that still doesn't fix it, you have either some dead parts and/or a bad power supply.

I suggest, if you have another computer, put your HDD into it and get your music and porn off it that way.

+1 the easiest way is to just put the HDD in another computer and not bother stuffing around with the old one

Yes I think I'll just end up doing that. Only problem is the only comp I got here to do it on is my old mans and if I mess that up im screwed. If I follow a guide off google say on installing it as a slave drive will I have any untowards problems because it has its own OS on it and what not??

if you don't know what you're doing, get someone else to do it (ie putting hard disk in another computer).

Chances are in a computer that old, it's an IDE hard disk, most modern computers have done away with an IDE controller completely in favour of SATA (depending on chipset etc)

if you don't know what you're doing, get someone else to do it (ie putting hard disk in another computer).

Chances are in a computer that old, it's an IDE hard disk, most modern computers have done away with an IDE controller completely in favour of SATA (depending on chipset etc)

Most new motherboards have at least 1 IDE port in my experience. Worst case scenario like Boz said ask someone who knows what there doing to help out.

as I said, depends on the chipset, anything with a non cheap shit mobo (and even the Dell Optiplex post GX 620) dosen't have IDE.

OP: if you're not confident, have a look through youtube, it showed me how to replace the hard disk in a 24" Imac, and it still worked when I finished :D

as I said, depends on the chipset, anything with a non cheap shit mobo (and even the Dell Optiplex post GX 620) dosen't have IDE.

OP: if you're not confident, have a look through youtube, it showed me how to replace the hard disk in a 24" Imac, and it still worked when I finished :bunny:

The new Asus boards still have IDE. For instance the Asus M4A89GTD PRO still has it. That isnt what i'd call cheap shit.

well I dunno what this guy's dad is running, but it would be fairly safe to assume it's not running a name brand mobo. In addition that is a low end example; from what I've seen the cheaper chipsets with integrated graphics etc tend to have more legacy features like that.

well I dunno what this guy's dad is running, but it would be fairly safe to assume it's not running a name brand mobo. In addition that is a low end example; from what I've seen the cheaper chipsets with integrated graphics etc tend to have more legacy features like that.

True, true Boz. Its probably something on the cheap side even it is a name brand. Chances are it has IDE like you say, worst case scenario IDE cards can be had for $20 at the local computer shop.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
×
×
  • Create New...