Taking Out Afm Mesh

[ClutchBurndout-:(]

hey guys, im read up a bit on people removing the mesh on their afm, to make it less restrictive, what dangeres are there from doing this? i cant seem to find any apart from when handling it outside of the car, as you might drop something in it etc

has anyone done this? should i rip out the mesh?

ta

[Moodles2]

In short, "The mesh on the MAF is used to smooth out airflow to ensure the sensors have the best chance of a steady reading." Leave it on, Nissan put it there for a reason.

[08r3308]

i have taken mine of and its fine .

rev210 done some testing i think and it was better airflow , i cant seem to find the thread

[R31Nismoid]

There is little to no point - leave it there.

It stops debris.

[lachlanw]

all it will achieve is some "pit psychology"

anyone with half a clue will think your car must be real serious and fully hektik . anyone with a clue will think your a tard

[SECURITY]

leave it on. you will have more restriction from your rubber intake pipe closing in on itself before you get a restriction from the AFM mesh. and when you start getting an airflow problem with the higher power you will most likely be upgrading to a z32/map-sensor and some aftermarket engine management.

its pointless.