Jump to content
SAU Community

Powder Coating Rims + Retain Stickers

Brandon

By Brandon,
in Queensland

 Share

Recommended Posts

Brandon Veteran

Brandon

Posted
Posted

After putting the Nismo pads on, the brake dust on the front wheels are just ridiculous (someone told me it might be just bedding in to the rotors). Having white rims doesnt help so... I'm thinking of powder-coating my LMGT4 to black but I'd like to retain the genuine Rays' sticker on them. Is that possible? I know powder coating is around 80-100 per rim? But the sand blasting would rip the shit out of the stickers...

Or maybe someone knows somebody that wanna swap a set of black TE37/LMGT4 in 18s with me? Recommendations for powder coating shops around Brisbane or advices are all welcomed. Cheers.

PS: I'm not concern over the Nismo sticker because they can be replaced.

Link to comment
https://www.sau.com.au/forums/topic/331021-powder-coating-rims-retain-stickers/
Share on other sites
Brandon Veteran

Brandon

Posted
  • Author
Posted
May be able to heat the stickers then lift them off and somehow apply them again?? Would be a very fragile and difficult job, but that's the only way i can see if you want to retain the originals.

Nah I'll just live with it if it cant be done (which I sort know but just wanna confirm).

Seems highly unlikely. And pointless.

Its not pointless. This is not the Nismo sticker on the spokes but the manufacturer's sticker with details of the rims on the inside. Thats the easiest way to tell if the rims are genuine Rays.

you do realise powdercoating is baked in an oven, and the rim must be sandblasted beforehand. just find new stickers. a place at sumner park does them 65 a rim minus sandlbasting charge.

Yes I do. Thanks for the recommendation too.

Isola Grand Master

Isola

Posted
Posted (edited)
Its not pointless. This is not the Nismo sticker on the spokes but the manufacturer's sticker with details of the rims on the inside. Thats the easiest way to tell if the rims are genuine Rays.

:):D :D

Take one of your wheels off and look at the back between the lugs. They'll be stamped if they're genuine. If it was as simple as putting stickers on it there would be a hell of a lot of copies out there already posing as fakes...

Actually... if yours only have stickers and no stamps... :D

It'll look like this if they're real

DSCF0740.jpg

and if they're fake then you don't need to worry about stickers :D

Edited by Isola
astrotristan Grand Master

astrotristan

Posted
Posted
Did I not say the easiest? You'll have to pull the wheels out to see that stamp whereas the sticker is visible without doing anything.

1 thing man -

Doesn't the sticker/markings whatever, only mean something upon the sale of the rims? - like to prove to the buyer that they are legit..

I'm not buying any rims that i cant take off the car before I pay..

go to the joint Dave recommended :)

OR buy some rota GTR-D 18*12s in black :D

Isola Grand Master

Isola

Posted
Posted
Did I not say the easiest? You'll have to pull the wheels out to see that stamp whereas the sticker is visible without doing anything.

:D Fancy some cheese?

You're wrong anyway. The easiest way to tell if they're genuine is to LOOK AT THE STAMP. Looking at the sticker is just the easiest way to see if it has a sticker on it. Anyone can make up a sticker and bang it on. I could sew an Armani label inside my jacket, but it still won't be one. Get it?

The car is 8 inches off the ground anyway - turn the wheel and use a torch or a torch and mirror if you have to.But really, if you can't have a wheel off and back on again in 5 minutes there's something terribly wrong.

t5iv Grand Master

t5iv

Posted
Posted
:) Fancy some cheese?

You're wrong anyway. The easiest way to tell if they're genuine is to LOOK AT THE STAMP. Looking at the sticker is just the easiest way to see if it has a sticker on it. Anyone can make up a sticker and bang it on. I could sew an Armani label inside my jacket, but it still won't be one. Get it?

The car is 8 inches off the ground anyway - turn the wheel and use a torch or a torch and mirror if you have to.But really, if you can't have a wheel off and back on again in 5 minutes there's something terribly wrong.

And there is nothing wrong with that!

Nee-san Grand Master

Nee-san

Posted
Posted
you do realise powdercoating is baked in an oven, and the rim must be sandblasted beforehand. just find new stickers. a place at sumner park does them 65 a rim minus sandlbasting charge.

Can said place also straighten wheels and repair gutter rash ?

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Good luck on the weekend mate
    • Duncan
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Duncan · Posted

      Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Duncan
      New

      By Duncan · Posted

      Welcome to SAU, what are you looking at buying?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...