Jump to content
SAU Community

Recommended Posts

I have a Eonon - EO859 that came with my GTT, but it randomly drops radio and "seeks". I have taken it out and checked the aerial but all looked fine. Not sure what else to check anyone help me out.

Here is a link to the unit - http://rsonlineshop.com.my/Spec/New/859.htm

Thanks for reading.

Link to comment
https://www.sau.com.au/forums/topic/331362-eonon-dropping-out/
Share on other sites

I have a Eonon - EO859 that came with my GTT, but it randomly drops radio and "seeks". I have taken it out and checked the aerial but all looked fine. Not sure what else to check anyone help me out.

Here is a link to the unit - http://rsonlineshop.com.my/Spec/New/859.htm

Thanks for reading.

most of the time its going to happen with any radio, multipath is a huge problem with "Nissan diversity antennas" they suck ass on a good day

before blaming the radio I would look at the antenna connection, most are hacked up when they bring them into OZ. to put on freq.converters. and without a good ground plane refuse to get a decent signal. or they might just have a loose jack ? setup on local or distance switch ????

you can get a stick on grid antenna similar to the rear defroster grid for a replacement or go old school and get a EVO,BMW,MERC roof mount instead ?

Hey troy thanks for the reply. The antenna on the back on the unit looks very clean and untouched. Im not quite sure what else to look at / for.

most likely the antenna in the rear de- mister area then or mutipath from nissan diversity antenna idea (worthless) in adelaide, if your unit has a local distance button put it on local in town?

where in town does it happen? expressway ,airport, cbd ?????

Randomly everywhere, usually around overhead wires etc

if you have access to a old school type antenna (metal rod type) to test it with, like old ford one, plug it in and prop it up in the seat I can just about bet the one in the rear window is stuffed, most suck

even a newish mitsu VRX I drive around sometimes with a top of the line factory radio, and roof antenna does that same thing , around Adelaide. my old top of the line Pioneer did it in the R34 as well. but found the wires hacked from importer and rear ones disconnected off GPS unit in rear pillar.

don't throw the radio out yet, the antenna needs a ground plane to work right. what part of town do you live in down south ? might try amplified hidden model instead ?? or if your around one night at villi's look at it for you?

Edited by sapphiregraphics

Hey troy, live west ish (Flinders Park) I maybe able to make it to villies this Friday depending on my missus going to a party. Be awesome if you could look at it.

I don't have a spare antenna anywhere either unfortunately. When i start the car im not sure but it sounds like an aerial extending but that could be a completely different component ;)

http://cgi.ebay.com.au/D2203D-Eonon-7-DVB-...=item5d2a5f2f3c

this is the one i have and i love it (never had a problem with it ) but you wont find a digital areal to get the tv working with all channels :P

it would be a cheap upgrade for you

http://cgi.ebay.com.au/D2203D-Eonon-7-DVB-...=item5d2a5f2f3c

this is the one i have and i love it (never had a problem with it ) but you wont find a digital areal to get the tv working with all channels :P

it would be a cheap upgrade for you

the noise you hear is the ABS brakes running a test on the line pressure when you first drive off. 10-15 seconds after moving forward. on the GTT

I have a cheap upgrade antenna for Digital tv. lol works a treat but needs some fiddling to get it sorted.

thanks for the buttons to push for local/ distance

due to prior commitments I have been volunteered to go out to eat friday , so villi's is out mate. sorry.

I live 15 min from noarlunga , in the dirty south...lol

ok well the second thing to check (common problem ) is that they havend uses a metal bast tint on your rear window as this will affect your reception , also the adapter plug used to run an aftermarket radio tend to fall apart once pluged and unpluged a few times .

good luck .

also most eonon's are utter crap theres only 1 modle i have found to get worth its money !! the first and second ones i had were shit and the third was great !! the last one i just got for the wife is newer but alot harder to navigate the menues and settings but works fine

ok well the second thing to check (common problem ) is that they havend uses a metal bast tint on your rear window as this will affect your reception , also the adapter plug used to run an aftermarket radio tend to fall apart once pluged and unpluged a few times .

good luck .

also most eonon's are utter crap theres only 1 modle i have found to get worth its money !! the first and second ones i had were shit and the third was great !! the last one i just got for the wife is newer but alot harder to navigate the menues and settings but works fine

they do have support if you bought from one of the bigger sellers , and MSN to discuss any issues live.

had one that had out of date test maps, they FTP'd me the new version , no drama's

the plug above causes most problems or hacked installs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...