Jump to content
SAU Community

Recommended Posts

First of all - sorry about all the posts, I dont know why it triple posted yesterday and why none of them can be read!

I have finished up my paint work on my bnr32 and now want to do the wheels. I have come across a set of 350z rims and think they'll look good on my car... The rims are 18x9 with an offset of +30.

What do you think they'll look like? Car the car is like this:

gallery_43534_3854_55265.jpg

gallery_43534_3854_64614.jpg

Link to comment
https://www.sau.com.au/forums/topic/331666-350z-rims-of-a-street-driven-bnr32/
Share on other sites

Yeah I have thought about this. I do want to get a set of XD9's in 18x10 with a +12 offset but dont want to run them on the road every day... I do a lot of KMs a year so dont want a forged rim for everyday use...

You reckon these will sit more inside the guards than the standard rims that are on it at the moment?

XD9's are a cast rim, not forged. And most 350Z Track edition rims are exactly the same size front and back. It's the optional Rays rims made for the Z were staggered, and later model cars.

Really? The XD9s are cast? Well that opens the option of them up to me more... What are your thoughts JDM??? Will they look alright (offset wise)?

XD9's are a cast rim, not forged. And most 350Z Track edition rims are exactly the same size front and back. It's the optional Rays rims made for the Z were staggered, and later model cars.
Heres some facts , JDM Performance needs to study up.

All 350z track Front

Size: 18x8.0

Offset: +30mm

Weight: 18.19lbs

Tire: 225/45/18

Rear

Size: 18x8.5

Offset: +33mm

Weight: 18.62lbs

Tire: 245/45/18 and standard rims were staggered as well , the only 350z wheels that were same alround were touring !

Heres some facts , JDM Performance needs to study up.

All 350z track Front

Size: 18x8.0

Offset: +30mm

Weight: 18.19lbs

Tire: 225/45/18

Rear

Size: 18x8.5

Offset: +33mm

Weight: 18.62lbs

Tire: 245/45/18 and standard rims were staggered as well , the only 350z wheels that were same alround were touring !

And here's one right back at ya buddy.

Early model 350Z Track runs on EXACTLY the same sized rims front and back, like I mentioned before. They are 18x8+30 all round. However they ran different sized tyres. This is what they look like.

wynn070516-img600x450-12422194616lczua98060.jpg

It was not until 2005 when they released the Anniversary edition 350Z Track that had staggered rims. And they were 18x8+30 fronts, 18x8.5+33 rears. Subsequent models ran on the same Anniversary rims. Here's what they look like.

mu_ac11-img600x448-1280232330v72vrj38688.jpg

And you are arguing with someone who not only sells rims as a business, but even owned a 350Z 2003 track model, with the very same rims as the first picture.

And just another point you mentioned about the 17" rims being the same sized F & R? Well they are not..

You may have most likely researched your findings through an American site. And to be frank, I don't blame you because their 350Z versions and how they interpret Touring/Track/Anniversary cars are completely different to our Oz models. And that's a fact.

So enough with arguing, let's just move on shall we? :whistling:

Really? The XD9s are cast? Well that opens the option of them up to me more... What are your thoughts JDM??? Will they look alright (offset wise)?

Those XD9 you mentioned will stick out slightly of the guards of an R32 gt-r, but can make them fit by running camber and/or a bit stretched tyres. They're a very nice looking rim and a much cheaper option than say, TE37 or CE28N, which look very similar to (the CE's that is)

Here's the optional Rays wheels you can buy from Nissan when the 350Z were still available, staggered sizes like the Anniversary rims, BUT you can also choose to have them the same sized front and back, if you wish. It was your choice. They were a $5k addition to the price of the car, and you had to give up the standard track rims. Pretty average looking but they were forged monoblocks and extremely light.

partsoffget-img415x236-1223628159reoqqj49436.jpg

And here's one right back at ya buddy.

Early model 350Z Track runs on EXACTLY the same sized rims front and back, like I mentioned before. They are 18x8+30 all round. However they ran different sized tyres. This is what they look like.

wynn070516-img600x450-12422194616lczua98060.jpg

It was not until 2005 when they released the Anniversary edition 350Z Track that had staggered rims. And they were 18x8+30 fronts, 18x8.5+33 rears. Subsequent models ran on the same Anniversary rims. Here's what they look like.

mu_ac11-img600x448-1280232330v72vrj38688.jpg

And you are arguing with someone who not only sells rims as a business, but even owned a 350Z 2003 track model, with the very same rims as the first picture.

And just another point you mentioned about the 17" rims being the same sized F & R? Well they are not..

You may have most likely researched your findings through an American site. And to be frank, I don't blame you because their 350Z versions and how they interpret Touring/Track/Anniversary cars are completely different to our Oz models. And that's a fact.

So enough with arguing, let's just move on shall we? :D

Sorry mate , i first realised they were different offsets when i took my own rims off my track version and measured them for myself ,i was surprised , but you must know better !!!

  • 4 weeks later...
And here's one right back at ya buddy.

Early model 350Z Track runs on EXACTLY the same sized rims front and back, like I mentioned before. They are 18x8+30 all round. However they ran different sized tyres. This is what they look like.

wynn070516-img600x450-12422194616lczua98060.jpg

It was not until 2005 when they released the Anniversary edition 350Z Track that had staggered rims. And they were 18x8+30 fronts, 18x8.5+33 rears. Subsequent models ran on the same Anniversary rims. Here's what they look like.

mu_ac11-img600x448-1280232330v72vrj38688.jpg

And you are arguing with someone who not only sells rims as a business, but even owned a 350Z 2003 track model, with the very same rims as the first picture.

And just another point you mentioned about the 17" rims being the same sized F & R? Well they are not..

You may have most likely researched your findings through an American site. And to be frank, I don't blame you because their 350Z versions and how they interpret Touring/Track/Anniversary cars are completely different to our Oz models. And that's a fact.

So enough with arguing, let's just move on shall we? :D

I have a set on my car - track rims the forged Rays ones. They are 8" +30 front, 8.5" +33 rear. Same fitments as anniversary. No need to measure - it is stamped on the inside of the wheels.

Edited by simpletool
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...