Jump to content
SAU Community

Recommended Posts

Item:EVO 8 GSR

Location: SYD

Item Condition: Overall 4.5 / A grade for interiors

Reason for selling:pay off my debts

Price: $34,000 neg

6 SPEED FACTORY POWER OPTIONS ABS AIR BAGS RECARO SEATS BREMBO BRAKES

Went to Japan to inspect EVO 8 by myself. All genuine dcumentations are ready to show you < 65,000 GENUINE KMs>. Really carefully selected car from Japan. You can be a first owner in Australia.

No MODIFICATION = Etreamly good condition. Even for me, I was suprised with the conditions! Standard and factory model is more expensive in Japan. Value is lot more than any Evo in Australia

This EVO 8 GSR is completely stock standard, it still has potential to be a beast. Overall grade is 4.5 and grade A for the interiors which mean RARE condition on the Earth. One you inspent the car, you will not be dissapointed.

Comes with 2 keys, new tyres, all replaced oils and 6 month REGO.

Possible to inspect after 13/08/2010 because it is still under compliance test unless come to workshop with me by appointment. After that date, you can see it around Campsie area during day time on weekdays or see around City area or! If it not too far, can drive your place to show you.

Only serious buyers, please call for more info.. 0424 177 900 or [email protected]

$34,000 Neg.. but not much.. I paid a lot in Japan!!!

.

Oh…I will get facy shift handle for you.!

post-73805-1280928371_thumb.jpg

post-73805-1280928383_thumb.jpg

post-73805-1280928394_thumb.jpg

post-73805-1280928402_thumb.jpg

post-73805-1280928411_thumb.jpg

post-73805-1280928419_thumb.jpg

post-73805-1280928433_thumb.jpg

post-73805-1280928442_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/331712-fsevo8-best-condition-sydney/
Share on other sites

1. sign up to SAU

2. intro maybe!?!

3. Post #2= Laughable priced VIII up

4. Try to profit from members

Welcome to the forum buddy!

lucky he didnt post it up on evooz, otherwise he'll get bagged real hard lol

Hello I'm looking at your evo8. It states that it is the "Best Condition'. What is the "best condition'? You have not given us a clear scale of condition nor a way to benchmark your evo against it.

Overall grade is 4.5 and grade A for the interiors which mean RARE condition on the Earth.

You then go on to say it has a grade of 4.5 which is a measureable scale, but don't state the top end. AND THEN CHANGE THE SCALE to a letter grade... and then state its rare.

aka. derpderpderp

You can thank me later.

I know it is bit highr price.. but.. To be honest... this car is imported for selling to my friend and I went Jap three month ago..this car is my best choice and best condition I have never seen..<Awsome!> my friend has some problem with his family and could not pay to me..cause I paid all of expenses... I have paid..about 32,000 and still need to pay for new tyres....hmmmm..

I promise..If you guys want to see my car after next fri..< it will be finished all documentation..><only for serious buyer..>, will go your place...

I am really confidence with the condition!!!

Closed.

This looks to be a trader ad.

If you wish to sell the cars you are importing on this forum, you will need to become a registered business trader and pay to advertise.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...