Jump to content
SAU Community

Recommended Posts

Hey people I'm new to this forum and this is my first question.

Last night I loooked at an R32 GTS-4 and judging by the milky oil under oil cap and bubbles coming through the radiator, it has a blown head.

The price tag is $7,500 and but he said he'd sell it for $6,500.

It's a nice car other than the engine but it will need a new head. I'm just wondering what would be the approximate price to get the head fixed up on the RB20DET?

Link to comment
https://www.sau.com.au/forums/topic/331740-rb20det-blown-head/
Share on other sites

Anywhere from $1200 to $2500 depending if its straight gasket install to new head bolts headservice new tbelt & waterpump while your at it... Depending on what its got tere a few r32 still running well you can pick up for close to what hes asking but we dont know the car in question

Thanks for the info krazyzie32.

I've been doing a little research and have found out that the slight milky residue in the oil cap could just be a build up of moisture due to the cold weather and the fact that the guy hasn't driven the car up to operation temperature for a while. It has been sitting out in the open in a car park at his work for a number of weeks. It's not a brown colour and it's not a massive build up, simple a few droplets of water making it look whitish. I'm thinking and hoping it's condensation.

There is no milky residue on the dipstick which is a good sign. I'll have to check for sure that there are no bubbles in the radiator while it's idling. Also I will make sure there is no white smoke coming out the exhaust and check that there is no coolant smell.

Hey people I'm new to this forum and this is my first question.

Last night I loooked at an R32 GTS-4 and judging by the milky oil under oil cap and bubbles coming through the radiator, it has a blown head.

The price tag is $7,500 and but he said he'd sell it for $6,500.

It's a nice car other than the engine but it will need a new head. I'm just wondering what would be the approximate price to get the head fixed up on the RB20DET?

Do a compression test and a radiator pressure test. but the 25 idea sounds great, >_<

I bought the car for $6250 and yep it was just condensation in the engine! It hadn't been driven for ages, just started up once a week but never got up to operating temperature. I took it for a bit of a spin and a little bit more white milky crap acumulated and now nothing!! It's all sweet!

So happy. I'm loving this car!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...