Jump to content
SAU Community

Recommended Posts

hey guys im just wondering im after a pair or slotted rotors for my r33 gts series 2. im after a good brand to go for and plus a good place where they do those types of rotors suplied and fitted. im in sydney and looking for some where around the west or near abouts anyway. but i need good mechanics to do it, at the moment i have slotted rotors but they are shit and i have problems with them. (must be a cheap brand).

Anyway anyone with any info please or know of any good spots pls let me know thanks guys.

Edited by bradley
hey guys im just wondering im after a pair or slotted rotors for my r33 gts series 2. im after a good brand to go for and plus a good place where they do those types of rotors suplied and fitted. im in sydney and looking for some where around the west or near abouts anyway. but i need good mechanics to do it, at the moment i have slotted rotors but they are shit and i have problems with them. (must be a cheap brand).

Anyway anyone with any info please or know of any good spots pls let me know thanks guys.

Go with RDA, I have had very good experience with them + Bendix Generals pads.

I had RDA slotteds on my 33 and they didnt handle the track days very well at all... maybe Im just hard on my brakes...

DBAs next time, and if I munch them Project Mu

I had RDA slotteds on my 33 and they didnt handle the track days very well at all... maybe Im just hard on my brakes...

DBAs next time, and if I munch them Project Mu

yea but i dont think ill be using it for the track it will be for everyday driving pretty much

dba all the way for decent performance at a good price. even though jap car they are made for aus conditions. the right pad is essential too

waht type of dba brakes you have and what pads are you using are they heavey duty or just the standard ones, and do you have squealing problems

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...