Jump to content
SAU Community

Recommended Posts

I hope to run my RB30/RB26 up over the weekend to check it runs and iron out any leaks that may occur. I wanted to know if I will be safe running it on the RB26 Apexi ECU base map or if I need to tweak some fuel settings to be safe? I have a hand controller. No datalogit. The engine has 700cc Sard injectors which I can plug into the hand controller and I am leaving it on stock MAF's for now. I have Q45's to put on but I gather they are a little tricky to work with on an RB26 ECU as they are not an option. Anyway that is a different thread all together.

If I can change some settings to richen it up a bit I would appreciate some brief instructions. alternatively if there is a self learn function that will work for the idle please let me know.

Thank you

Lee

Dude, I spoke to you on GTR UK....

I will help you get your car in a running state to take to your tuner. After i am finised with it you will be able to drive it and not have to trailer it..

Add me to MSN like i suggest on gtr.co.uk

We will sort it out.

If you need a decent tuner, I am for hire and not very far away ATM

Anthony

Hi there Anthony,

I had a hectic weekend and didn't quite get where I wanted to hence I have not been in touch. I will add you to my MSN tonight with any luck and have a chat. Thanks again. I guess you are no in Australia at present then?!

Regards

Lee

Don't mean to be negative but unless you know what your doing (I don't mean fuel air spark. I mean knock, degree's, temp, fuel pressure, reading plugs and hearing the slightest ping/miss) then don't play with your hand controller. Performance engines are very fragile in the wrong hands and temptation to take out some fuel or add some timing so you can put your foot down just half way is always going to end badly if something else is already playing up that you don't know about. Set the controller to view knock, temp and oil pressure and be ready to turn off the key if your playing with it yourself.

Trust me. I Have no intention of playing with it myself! Purely want to start it up and make sure it runs okay and has no big leaks! Aims is to richen my base map to be double safe for the few seconds it will be running!

Thank you for the warning though.

i put a stock power fc on my rb2530

the base map was perfect!*

went hard and fuel was spot on

*this is a massive fluke

I ran my 25/30 on a stock RB20 ECU for a few months with no dramas. Stock afm was maxing out about 6000rpm but because the 25 turbo was choking the engine at 5800rpm it wasn't really an issue.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...