Jump to content
SAU Community

Recommended Posts

hey guys ive installed my intake plenum but have no idea how to install the top hose outlet on the plenum. cant weld it because of the different types of material. is there a special glue of some sort that you use to put it in. or what have you used?

thanks

Link to comment
https://www.sau.com.au/forums/topic/332411-rb25-greddy-copy-inlet/
Share on other sites

top hose outlet? which one are you talking about?

are you talking about the bleed nipple?

no where the actual top hose from the radiator clamps onto the inlet, mine didnt come welded on or anything but i got the littloe pipe that fits into the hole as pictured below

Image0034.jpg

Edited by r33skyhigh

I had a kit that came with my plenum. Included all the bolts, fittings etc. It had the fitting for the radiator hose. Now i got mine off someone else but he bought it from autobarn and they sold him the kit as well.... So maybe give autobarn a go

Its basically just a press fitting that will just tap in, seal it with some loctite or similar when you put it in

Im betting autobarn will have it it or will be able to get it in for you. If not I think (but not 100% sure) that the genuine Greedy plenums are the same so might be able to get the fitting through nengun or something in the option parts?

EDIT: Just checked nengun and greenline, doesnt look like you can get the fitting for the Greedy plenums, Try autobarn

Edited by 89CAL
I had a kit that came with my plenum. Included all the bolts, fittings etc. It had the fitting for the radiator hose. Now i got mine off someone else but he bought it from autobarn and they sold him the kit as well.... So maybe give autobarn a go

Its basically just a press fitting that will just tap in, seal it with some loctite or similar when you put it in

Im betting autobarn will have it it or will be able to get it in for you. If not I think (but not 100% sure) that the genuine Greedy plenums are the same so might be able to get the fitting through nengun or something in the option parts?

EDIT: Just checked nengun and greenline, doesnt look like you can get the fitting for the Greedy plenums, Try autobarn

yeah i got the fitting its just not on. ill try tapping it in see what happens shouldve done it before i put everything else on...

yeah i got the fitting its just not on. ill try tapping it in see what happens shouldve done it before i put everything else on...

should be alright, might have to remove the throttle body at the worst. Using a sealing compound when you knock it in for a good seal :D

smear it with liquid gasket and shove it in, hit it with a bit of wood for it to squish in.

I doubt any shavings will come off as your not shaving anything. If they do come off its in your water not your oil which is no biggie.

oh, you said "tapping" which is tapping a new thread, when you do this, quite a bit of shavings come out.

but i can see in the pic, just put a rag in the hole and do ur busness, pull the rag out, should catch anything that fell in ???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...