Jump to content
SAU Community

Recommended Posts

Thinking about selling my skiline just thought id see if theres any interest out there first....

1995 R33 GTS-T 4 door Skyline

Manual

92,xxxklms

2 tone silver with dark grey(ill post up a pic)

M Sport bodykit

R34 gtt wheels

Strut brace

HKS mushroom air intake

Nismo catback exhaust

factory sunroof

heavy duty clutch (think its OS Giken but not 100%)

fully aluminium radiator(bigger then the standard)

Blitz turbo time

jvc bluetooth stereo with usb & mp3 input

Drift weighted gear knob

new gearstick/handbrake boot leather

autotechnica steering wheel

boost guage

mirror tinted windows

just had a full service and tune at boost automotive, cost me $550, replaced all spark plugs with iridium ones, changed filters, oil etc and gave it a tune.

a couple of minor problems- when car is first started there is a clicking sound behind the dash ever since i changed the dash surround(because of someone painted the last one and wrecked it) it only goes for 5-10 seconds but has nvr worried me, next the indicators dont click off by themselves, i guess its something to do with the non standard steering wheels not being on there? not sure and also front brake pads will need doing soon.

other then that ive nvr had any problems or issues with it, its been a great car for me i just want a change.

thats about all i can think of at the moment.

id be interested in swaps, prob not really higher(may for the right car) but straight swaps or lower, cash sale is always preferable though.

Im after $11, 500 ono

cheers Brad

post-45248-1281426738_thumb.jpg

post-45248-1281426766_thumb.jpg

post-45248-1281426780_thumb.jpg

post-45248-1281426795_thumb.jpg

post-45248-1281426803_thumb.jpg

post-45248-1281426986_thumb.jpg

post-45248-1281427082_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/332418-eoi-95-4dr-r33-skyline-gts-t/
Share on other sites

  • 4 weeks later...
oh thanks mate, is it an easy fix'? how can i fix it? cheers brad

Hardest bit it un screwing the little motor from on top of the heater box ya gotta take out the glove compartment and hope you have small enough hands to kinda reach and twist up there you should feel it think its got 3 mabey 4 screws, thereis a link to a fix it somewhere ive read before ill have a sus later. Hey i just noticed your car use to be auto hey,

Edited by NismoGTR33
Hardest bit it un screwing the little motor from on top of the heater box ya gotta take out the glove compartment and hope you have small enough hands to kinda reach and twist up there you should feel it think its got 3 mabey 4 screws, thereis a link to a fix it somewhere ive read before ill have a sus later. Hey i just noticed your car use to be auto hey,

Oh how could u tell my car used to be auto? but ur right it was changed at some stage, the previous owner told me it was done about 5 yrs ago, just before he got it. oh so u just gotta replace the motor? if u could find that thread itd b great :blink: thx!

  • 2 weeks later...

i reckon he could tell cos on the interior pic you can see the gauge cluster with the gear column selector in it. lol.

my mrs would love me to get this as she has one too, lol. but unless you want a 5spd v8 vs maloo and have another 2k for me then theres no chance shes getting her wish, lol.

This is the thread I used to fix mine mate (http://bit.ly/dcMcwi). I would say that you should make sure you have a vice, a few flat head screwdrivers and gloves before you attempt to pry it apart. Took me a good hour of bashing and scraping to actually get into the damned thing. Also, when you're trying to get your hands up to reach the screws, as stupid as it sounds, get on your hands and knee's outside the door and reach in, don't bother trying to lay on your back and bend your arms backward to reach it like I did for ages before the missus showed me how it's done (only mildly embarrassing in the long run).

Oh how could u tell my car used to be auto? but ur right it was changed at some stage, the previous owner told me it was done about 5 yrs ago, just before he got it. oh so u just gotta replace the motor? if u could find that thread itd b great :) thx!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...