Jump to content
SAU Community

Recommended Posts

How is the Graytronics a league above? What else does it do.

It's not about gimmicks or features. It's about quality - the Graytronics is orders of magnitude clearer, and more reliable. I don't know af too many people who haven't had trouble with Terraphone intercoms.

don't think that just because it has bells and whistles, it's a good product. If you want clear calls that won't let you down at the worst possible time, stay well clear of the terraphone stuff. I too thought it was good when it was all I'd ever tried. When I moved on to the graytronics I realised what shyte the terraphone stuff was

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Pretty much all this stuff is so overpriced for the actual electronics behind it - treading carefully here with forum rules etc

One of those 80s electronics gurus with some square frame glasses and a red wooley jumper could build you something infinitely better out of the jaycar catalogue for a 10th of the price.

Good to see companies like stilo stepping in and at least supplying a good quality tested product for the money you fork out.

It really isn't!

I might actually look at something as a bit of a project when I tackle this soon - I have access to a couple of said 80s electronics gurus.

I was so unimpressed with this gear for the price, and the rally computers too. I saw a market that Stilo and other manufacturers have since really moved to fill.

Theory dictates if we can attach a $79 head unit and some crappy speakers to a 12v car system without major interference, adding a couple of microphones shouldnt be a problem.

i'm with WARPS, the greytronics gear is way above anything else out there.

it's disign was done by the military, for use in Tank's so it's sound quality is awesome, cystal clear

with no feed back or electrical interference, as this kind of thing in a Tank can make thing's go BANG!!!

Cheers Jon

Theory dictates if we can attach a $79 head unit and some crappy speakers to a 12v car system without major interference, adding a couple of microphones shouldnt be a problem.

My thoughts exactly

i'm with WARPS, the greytronics gear is way above anything else out there.

it's disign was done by the military, for use in Tank's so it's sound quality is awesome, cystal clear

with no feed back or electrical interference, as this kind of thing in a Tank can make thing's go BANG!!!

Cheers Jon

Military spec, I love it :P

My two cents (and essay)…

You really only learn to nav and listen to the notes when you actually get on the job (I know, very helpful Kel!).

That said there's heaps you can do beforehand to get you well prepared for how it will be.

As many have said, watching as much in-car as you can is a big help, though try to pick cars which are similar to yours in speed. Having been in pretty quick cars and not so quick cars this can make a big difference to what you will end up including in the call (as an example, there’s not much point calling distances under 100m in an R35!).

If you can organise it, it’s also great to make your first event one where you just repeat the same road over and over (like Mt Buller) - perfect for refining what you do and don't include as well as perfecting the timings for the calls. The biggest challenge is working out the timing which suits you- as Tim has said every driver is different. Some like to know what's going on three corners ahead, while others have enough memory (just) for the next corner :P

The only way you'll learn this is trial and (unfortunately) error! - and you need to be giving your nav lots of feedback. You'll find yourself asking for the next call or telling them to slow down alot in the beginning!

Doing some decent reccy will help, though it also helps to remember that how you may read the notes at road rules speed versus race speed will be very different! I think sighting it though, seeing how it all works and doing a few runs is perfect for building up the confidence needed for your first real run.

The other bonus is that with many events your first run is a prologue, so less pressure, usually a shorter, easier run, often with a sighting drive-through beforehand, so you can get your eye in proper.

I think doing your first rally with someone close to you, who you trust, can make a difference- you'll both be much more forgiving and hopefully much more relaxed.

I am a big fan of buying notes- partly because all the events I do are interstate and I am usually with drivers who don't have a lot of time for reccy not to mention writing our own notes. A lot of people think 1-6 is better for people starting out and I tend to agree- it's much better to be concentrating on driving to the call instead of having to try and work out the difference between a 6/7/8 corner. Best 1-6 I think are Vandenbergs notes.

That said I've also run with a driver new to rally who wanted to use 1-10 long term so that’s what we started with, without any dramas. Rallynotes is my preferred 1-10 and have never had a problem with them.

For intercom, I've used terraphone, peltor (via an adaptor plug in my Stilo helmet) and a Stilo. Have to say I am a Stilo convert- the noise cancelling is amazing.

Sorry if some of this is pretty obvious- just know I knew almost nothing when I started out (and probably still don't know too much :( )

Good luck & hope to see you and your wife at a rally soon!

Also happy to have a chat to her before a rally about what to bring, what to do etc etc etc if that would help.

Thanks heaps Kel, no doubt I will be chasing you up at some stage to pick your brain :( Really appreciate the time put into the reply.

Side bar: We're not married lol

lol no worries at all- I have been fortunate enough to have a lot of good people give me advice over the years, so I'm happy to keep passing it on.

For intercom, I've used terraphone, peltor (via an adaptor plug in my Stilo helmet) and a Stilo. Have to say I am a Stilo convert- the noise cancelling is amazing.

.

I have a peltor fmt200 intercom in my car, it was damn expensive but suffers from terrible electrical interference, it is hardwired to the cars power system.

Does anyone have any tips for solving the feedback issues, is it as simple as running it on 9v power or can I purchase some sort of filter to place on the power line to cancel out any noise?

Any help would be greatly appreciated....and sorry for thread hijack :(

I have a peltor fmt200 intercom in my car, it was damn expensive but suffers from terrible electrical interference, it is hardwired to the cars power system.

Does anyone have any tips for solving the feedback issues, is it as simple as running it on 9v power or can I purchase some sort of filter to place on the power line to cancel out any noise?

Any help would be greatly appreciated....and sorry for thread hijack :yes:

I've never had a bad problem with interference noise, so haven't had to troubleshoot too much. HAve you got a good, clean source of power? I'm guessing a suppressor or some kind of filter should fix the problem.

On the topic of building a cheap intercom, I'm sure that if you can get quality electronic components cheap then you could build something cheaper than what's on offer. I know a guy in Newcastle building his own trip meters for rally (Ben Semple - member of Westlakes AUto Club for anyone interested). While his gear is cheaper than the main name brands, it's not what I'd call bargain basement. I think he was quoting somewhere near $400 for his top of the range model. I paid a couple of hundred over that for a Monit, but that was just my preference. I believe a few people have bought Ben's trip meters and are more than happy with them.

To echo Kel's comments, if you're a newbie driver, then you'll struggle to digest a lot of information while you're driving. Start off with basic notes and work your way up from there. The first pace noted rally I ever did, we just took the road book and added notes to any corner that was actually different to how it looked entering the corner. Ie if it held a surprise, then we made a note, otherwise we left the calls as they were. This worked very well for us, but having said that, we were used to blind rallies and already had some experience at reading the road.

I know that the top level drivers will have much finer descriptions for corners, but for those guys the difference in winning and losing is whether they can enter a fast sweeper at 120, or 140. THe slow stuff is always easier to read and you tend to have more time / room to respond if you stuff up a call

  • 2 months later...

Sorry to dredge up an old topic, but I'm in the process of buying a new Graytronics amplifier for my rally intercom (as I sold the unit with the last car but kept the headphones)

With the Exchange rate the way it is, the PRO amplifier is just a shade over $100 delivered (from UK). If you want a complete unit with headphones as well, they are about $220 delivered. Pretty bloody good buying, I think. They are now made by this mob (see link below). I don't know if this means that the quality will change - will know soon enough, guess.

http://www.rallyintercoms.co.uk/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...