Jump to content
SAU Community

Recommended Posts

Hi people,

I have to admit i didn't use the SEARCH function on this question, a little lazy.

I am wondering if the petrol you pump into your vehicle will stay 'fresh' after 2 weeks inside your car?

I remember i read from somewhere on the forums where people did mention that the 98RON might lose a few 'RONs' or something like that.

Link to comment
https://www.sau.com.au/forums/topic/332629-petrol-quality/
Share on other sites

2 weeks LOL... nothing will happen.. Well nothing to be concerned about... My fuel opften takes 1 month or so to get used... Still drives fine.. I'd only be concerned if your running high end power.. My fuel was sitting there for just over 8 months.. and finally drove the car the other day.. Mind you i am staying off boost until a fresh tank can be run though..

Edited by .:: GimpS-R34 ::.
Link to comment
https://www.sau.com.au/forums/topic/332629-petrol-quality/#findComment-5394835
Share on other sites

fuel doesn't go stale in 2 weeks. it does go stale over time, but not in 2 weeks, or even a month really. that said a car will still run on fuel that is pretty old, just not that well. i've got an old commodore and the fuel in it is a mix of about 6 months old and 2 years old and it still starts and runs. my mother has a 2000 model corolla and she had to have an operation and couldn't drive for about 3 months and her car ran fine after those 3 months (i drove it occasionally during those 3 months, but never put fuel in it)

Link to comment
https://www.sau.com.au/forums/topic/332629-petrol-quality/#findComment-5395053
Share on other sites

the amount that it gets diluted it's not worth thinking about though.

but in case you wanted to think about it.....

fill 1: 50L of fuel put in. for arguments sake we'll say it's a 50L of fuel and was drained prior to filling

fill 2: filled up with 10L left, so there's 40L fresh fuel and 10L 1 week old fuel

fill 3: filled up with 10L left, so now there's 40L fresh, 2L from fill 1 and 8L from fill 2

fill 4: filled up with 10L left, so now there's 40L fresh, 400ml from fill 1, 1.6L from fill 2 and 8L from fill 3

fill 5: same as above but now the 10L consists of 80ml of fill 1, 320ml from fill 2, 1.6L of fill 3 and 8L of fill 4.

so when you look at it like that, 40L is from the current fill, 8L is only 1 fill old and the remaining 2L is 2 fills or older and the stale fuel from fill 1 is going to be negligable (only 400mls of fuel in the tank is from 3 or more fills ago). the amount of fuel that is multiple fills old is always going to be small even if you will up with more than 10L to go.

but theoretically speaking the fuel tank still contains an extremely tiny amount of fuel from the very first time it was filled up.

Link to comment
https://www.sau.com.au/forums/topic/332629-petrol-quality/#findComment-5397712
Share on other sites

I dont think fuel goes of that quickly, it would take a few months atleast. It might depend on weather to? I think in the summer it may go off quicker but still not in a time span you would have to worry about unless you wern't going to drive your car for like 6 months. Even then it should be fine.

I have driven cars straight of the boat from japan and they drive fine and god knows how old the fuel is by time the car reaches Aus.

Link to comment
https://www.sau.com.au/forums/topic/332629-petrol-quality/#findComment-5397769
Share on other sites

Fuel does go stale over time. But months or years, not weeks, something like methanol you'd need to be more careful about but not boring unleaded. Lol. Get cars at work driven in by the "seniors", they keep the tanks filled to the neck and re-filled weekly after their one trip to the shops, fuel comes out yellow and has no smell to it, car runs, but poorly, but this is after 5+ years. And usually it's the water in the fuel causing problems in these cases...

Also, my car was knocking under load (so I stopped loading it) on it's journey home post-purchase (import from a dealer), good tank of 98' and it went away...

Link to comment
https://www.sau.com.au/forums/topic/332629-petrol-quality/#findComment-5398797
Share on other sites

fuel doesn't go stale in 2 weeks. it does go stale over time, but not in 2 weeks, or even a month really. that said a car will still run on fuel that is pretty old, just not that well. i've got an old commodore and the fuel in it is a mix of about 6 months old and 2 years old and it still starts and runs. my mother has a 2000 model corolla and she had to have an operation and couldn't drive for about 3 months and her car ran fine after those 3 months (i drove it occasionally during those 3 months, but never put fuel in it)

Thanks for sharing.

__________________

Watch Piranha 3D Online Free

Edited by nicoledc109
Link to comment
https://www.sau.com.au/forums/topic/332629-petrol-quality/#findComment-5401775
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...