Jump to content
SAU Community

Recommended Posts

have a mate pulling a 2.5lt one down. engine/driveline is already gone.

if you are interested - post up what you want off it. car is in nagoya. bits will load on the next container out.

Link to comment
https://www.sau.com.au/forums/topic/332899-anyone-need-35-sedan-bits/
Share on other sites

nick,

1.have that comng already.

2.unsure of colour - its and 03/04 model - front left hit. - will check.

3. do not think its bose. - will check

Son,

I'll grab that. do you want the whole thing?

it is easier if I get he whole shelf. its not really pick a part wrecking as I can ask for various bits but they usually come as an assembly. Basically I get one shot at the car before it goes to the crusher.

Oh ok no worries!

Anyway my car is 2005 S2 sedan and does the 03/04 3rd brake lights are the same?

Maybe going to buy a V35 Coupe Manual.

Its non Navi but top glove box has the blank cover missing from the optional navigation dvd drive - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

Maybe going to buy a V35 Coupe Manual. Would like to know how much a few things are to replace to negotiate in price.

Its non Navi but inside top glove box has the blank cover missing from the optional navigation dvd drive, its just a big hole atm - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

With the air induction - it no longer looks like this

Grill.jpg

The grill to collect air is not there and the air box is not there, just has a pod filter on the end of the hose.

Should i care about this?? when looking where the box was you can just see the drain hole..

Also the right hand side window when your in the car goes all the way up and into the sill. But

1. when you open the door the window comes down (as it should) and when you close it, does not go back up

2. when you hold down the button to put window up or down it doesnt automatically do it itself

3. when the door is open the button will not make window go up or down

Do you have the mechanism to fix this? the guy said some japanese parts place near south port quoted him 20-30 to fix...

Oh also the little plastic cover that goes over the screw in the inside left door handle - need that

Edited by R6n350GT
Maybe going to buy a V35 Coupe Manual.

Its non Navi but top glove box has the blank cover missing from the optional navigation dvd drive - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

need more detail on the 'gear changer' :)

have a non navi panel - when you buy the car we can talk the sphincter of the universe.

Maybe going to buy a V35 Coupe Manual. Would like to know how much a few things are to replace to negotiate in price.

Its non Navi but inside top glove box has the blank cover missing from the optional navigation dvd drive, its just a big hole atm - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

With the air induction - it no longer looks like this

The grill to collect air is not there and the air box is not there, just has a pod filter on the end of the hose.

Should i care about this?? when looking where the box was you can just see the drain hole..

Also the right hand side window when your in the car goes all the way up and into the sill. But

1. when you open the door the window comes down (as it should) and when you close it, does not go back up

2. when you hold down the button to put window up or down it doesnt automatically do it itself

3. when the door is open the button will not make window go up or down

Do you have the mechanism to fix this? the guy said some japanese parts place near south port quoted him 20-30 to fix...

Oh also the little plastic cover that goes over the screw in the inside left door handle - need that

didnt see the rest of this:

1,2,3: motor or calibration. if motor I can get them. if calibration thats easier. again when you get the car we'll talk the sphincter of the universe.

trim item inside door handle - always missing - $5 part from nissan.

didnt see the rest of this:

1,2,3: motor or calibration. if motor I can get them. if calibration thats easier. again when you get the car we'll talk the sphincter of the universe.

trim item inside door handle - always missing - $5 part from nissan.

Thanks Chris,

Meant to say gear stick knob not changer.

Gearstickknob.jpg

How do we know about what i need for window ?

As for the trim, save me going to nissan can u also get this?

Also for the other question re: cold air induction cover and box, should i leave as is or ?

Be great if you can PM me some prices, just so i know how much i barter with the seller.

Cheers

Edited by R6n350GT

knb would be better off new ex nissan. anything I lay hands on in that area is going to be worn.

I can lay hands on 90% of the small bits on that car. if they are big bits I have to get a mate involved and that costs money.

window is likely to be a motor. since you are in QLD - where?

Edited by Chris Rogers
knb would be better off new ex nissan. anything I lay hands on in that area is going to be worn.

I can lay hands on 90% of the small bits on that car. if they are big bits I have to get a mate involved and that costs money.

window is likely to be a motor. since you are in QLD - where?

In Gold Coast, Robina.

For big stuff can come down to Brissy.

Any advice on what kind of price i need to try and save on the car to pay for these fixes?

Glad i got you close by when i start all these mods!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...