Jump to content
SAU Community

Recommended Posts

This is a common problem. Almost certainly it's the diode in the circuit under the red plastic. Check the fuse first to make sure, but I think the same fuse controls other things like the rest of the brake lights so you'll probably have no brake lights at all if it's the fuse.

Remove the whole lighting assembly (I think it's held in with 2 screws from underneath) and check the circuit with an ohmmeter. If it's open, then it's probably the diode. Separate the red lens from the backing plastic with a razor blade or the like, and look near where the wires go in, you'll see the diode and probably notice it's burnt out.

You can either replace the diode with the same type, or just put a straight piece of wire in. The diode is only there to stop the whole series of LEDs getting zapped if you wire it in back to front, which you won't do because the plastic clip is directional. So a bit of wire is fine (that's how I fixed mine).

Put it all back together, using spots of super glue here and there to hold it in place. Not too much though because you want to be able to pull it apart again if you need to fix it in future. If you use wire instead of another diode though you probably won't ever have to fix it, except to replace individual burnt out LEDs, which is a total bitch to do and probably not worth the effort.

Hi JimX,

Many thanks for your reply - I was hoping I wouldn't have to pull it apart but it looks like it will need to be - I'm just thinking where the screws are, is ther 2 screws under the spoiler in the middle and the led lens bit will slide out or something?

Yeah that sounds about right. I'd like to give you a definite answer but I fixed mine so long ago that I can't remember. And I'm at work so I can't check for you :D I'm pretty sure it's just 2 screws, one either side and underneath. I used a stumpy philips head screwdriver under there somewhere.

Hi

The thingi that Jimx called a diode is really a resistor and it is there to drop the voltage down so you dont blow the LED's so putting a piece of wire in is not a good idea. mine was burnt out so could not see how many ohms it was. I worked out it should be around either 47 or 470 ohms (I cant remember, its writen down at home) If you can see the colours on it can you please let me know,

Mine has gone too. I've had a couple of cracks at separating the red from the black plastic... Its a BIATCH! :cuss: I'm making progress, but I end up just putting it back in after a while of cutting with a stanley knife. Might have another go this arfo.

BTW: it's 3 screws on an R33 :(

Nah, it's a diode. There's a diode sign on the circuit board and you have groups of 4 or 5 diodes running in series, dropping the voltage to each to somewhere between 2 and 3 volts removing the need for a resistor.

Put a diode in. Not that it means much, since all the LED's are diodes anyway :O Just bridge it if you don't have a replacement diode handy. I had one lying around and it's been working for 12 months.

Hi

The thingi that Jimx called a diode is really a resistor and it is there to drop the voltage down so you dont blow the LED's so putting a piece of wire in is not a good idea. mine was burnt out so could not see how many ohms it was. I worked out it should be around either 47 or 470 ohms (I cant remember, its writen down at home) If you can see the colours on it can you please let me know,

Serlock_nz

Its a freaking diode man. I was the electrical knowledge guy that helped jimx fix his spoiler light. From a rough memory the diodes are grouped together that the forward voltage drop on them is enough so you dont need to worry about dropping the voltage.

Lets just say that jimx's haev been running fine for at least 12 months and leds blow pretty fast when you put 12v or higher through them.

Cheers

Bombster

Well the one that I replaced was a resistor because I could see a couple of coloured rings but couldnt tell what colour the other rings were,

In mine only one section of the LED's had gone out, about a dozen.

they must use both diodes and resistors on the different models

Would I be right in saying to identify which you have, diodes are usually black with a silver ring around them with the diode symbol, and the resistor is usually cream coloured with coloured rings around them to show resistance value

Cheers

Well hmm. It doesnt matter if it is a diode or a resistor. Both diodes and resistors lower the voltage.

The average diode will drop the voltage around 1.5v and have the added bonus of only conducting in one direction for polarity protection of the circuit.

If you replace either with a piece of wire you may not necessarily destroy the device immediatly but you may reduce the potential lifetime of the LED's in the brake light assembly. Depending on the tolerence of the circuit of course.

Chances are nothing bad will happen.

  • 1 month later...

I have the same problem :)

I took the unit out from under the spoiler, but I have absolutely no idea how to get it apart to fix the diode! The unit seems impregnable!

Has anyone got any tips, instructions or pics on how to get it apart?

Thanks.

I think the whole light is around $200 second hand. Once I used the razor blade, I kind of levered it apart with a screwdriver. I managed to chip a small bit off the red part, so be careful.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...