Jump to content
SAU Community

Recommended Posts

Dont think there is a bearing in it either. I've had mine off using the SK DIY timing belt replacement. AFAIK it is two parts bonded together by rubber.????

Ther is a place at 17 Mile Rocks that has Stagea bits. They are in the Yellow Pages. A bit EXXY though, but close.

the only thing i have ever see go wrong with a harmonic balancer is the rubber bonding seperating or the key way flogging out

sounds a bit suss if you ask me

and there is no bearing on a balancer they must be talking about the idler for the timing belt which should always be replaced with the belt

Further to my last i dropped in and inspected myself.

Timing belt had dropped a tooth, timing bearings made the sound of sand when turned, harmonic balancer interior rubber was perishing.

So i went to just jap, and ordered the following

- Gates Racing timing belt kit

- HPI clear timing belt cover (bling bling)

- Ross Tuffbond harmonic balancer

Total cost $1028.70 with a 10% trade discount!

Kinda lucky in a way i caught it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
×
×
  • Create New...