Jump to content
SAU Community

Recommended Posts

Im selling my 1998 r33 s2 for $15000 ono otherwise i will swap it for something of interest...

my car has the following mods..

* R32 gtr lsd, half shafts.

* Top secret coilovers (3 way adjustable)

* Mines re-mapped computer, very conservative tune at 210 rwkw

* Z32 airflow meter

* Walbro in tank fuel pump

* Spitfire coil pack

* Big aluminium radiator

* Blitz cooler and piping

* Adjustable boost tap

* Engine Dampener

* Just Jap Racing front strut brace

* Brand new gates racing blue timing belt with clear cover

* Adjustable cam gear

* Apexi pod airfilter with fiberglass cover

* Front n back adjustable camber arms

* Adujustable Caster arms

* Hiflow turbo

* Lightened nismo flywheel

* Excedy heavy duty clutch

* Nismo cluster, nismo gear knob and nismo floor mats, (I have the standard skyline floor mats in brand new condition)

* Boost and water temp gauges

* Hicas lock bar

* Solid rear cradle bushes

* Full exhaust from japan with high flow cat and custom dump pipe

* Big body kit with stealth boot lip

* 25mm spacers on the back and 30mm on the front

* front- 17x9 rear 17x9.5 with new tyres all round

* Jappo head deck with jbl 6inch, alpine 6x9, jbl amp , pioneer sub

All these mods have been engineered and i have engineers certificate

i service it every 8000km and use motul motor oil and royal purple gearbox oil..

I also have the stock diff and half shafts

32 gtr control arms and hubs

400r front bar with add on lip

32 gtr handbrake cables

r33 s2 stock wing

You can call or msg me on 0410633612

post-76220-1282440175_thumb.jpg

post-76220-1282440223_thumb.jpg

post-76220-1282440253_thumb.jpg

post-76220-1282440285_thumb.jpg

post-76220-1282440316_thumb.jpg

post-76220-1282440350_thumb.jpg

post-76220-1282440379_thumb.jpg

post-76220-1282440406_thumb.jpg

post-76220-1282440430_thumb.jpg

post-76220-1282440472_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/333780-1998-r33-for-sale/
Share on other sites

Im selling my 1998 r33 s2 for $14000 ono otherwise i will swap it for something of interest...

my car has the following mods..

* R32 gtr lsd, half shafts.

* Top secret coilovers (3 way adjustable)

* Mines re-mapped computer, very conservative tune at 210 rwkw

* Z32 airflow meter

* Walbro in tank fuel pump

* Spitfire coil pack

* Big aluminium radiator

* Blitz cooler and piping

* Adjustable boost tap

* Engine Dampener

* Just Jap Racing front strut brace

* Brand new gates racing blue timing belt with clear cover

* Adjustable cam gear

* Apexi pod airfilter with fiberglass cover

* Front n back adjustable camber arms

* Adujustable Caster arms

* Hiflow turbo

* Lightened nismo flywheel

* Excedy heavy duty clutch

* Nismo cluster, nismo gear knob and nismo floor mats, (I have the standard skyline floor mats in brand new condition)

* Boost and water temp gauges

* Hicas lock bar

* Solid rear cradle bushes

* Full exhaust from japan with high flow cat and custom dump pipe

* Big body kit with stealth boot lip

* 25mm spacers on the back and 30mm on the front

* front- 17x9 rear 17x9.5 with new tyres all round

* Jappo head deck with jbl 6inch, alpine 6x9, jbl amp , pioneer sub

All these mods have been engineered and i have engineers certificate

i service it every 8000km and use motul motor oil and royal purple gearbox oil..

I also have the stock diff and half shafts

32 gtr control arms and hubs

400r front bar with add on lip

32 gtr handbrake cables

r33 s2 stock wing

You can call or msg me on 0410633612

Swap for a late model turbo pulsar sedan (engineered, long rego, great car, etc) + cash your way?

My thread if your interested:

http://www.skylinesaustralia.com/forums/00...sw-t333927.html

no way r from the moon lol

Well considering you never said what would be a swap of interest i think its a fair enough question and its not like i was suggesting a straight swap with no cash your way :blink:

It looks like a tidy car, i think your price is a little optimistic but good luck with it anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...