Jump to content
SAU Community

N1 Or Projector Headlights For Me?

NRV155

By NRV155,
in Exterior & Interior Styling

 Share

Recommended Posts

NRV155 Proficient

NRV155

Posted
Posted

I currently have the S1 projectors (no extra clear plastic over parker lights) on my gtst but i cant adjust the lights anymore as they just keep falling back down when i hit a bump. Im going to get new ones but need to know which ones would be best for me. I like the look of the S2 projectors and also the N1's. If i was to get the N1's, would my wiring and globes fit straight in? Also i have an Mspec so would my current fog light wires plug straight into the foggys on the N1?

Or should i just get the S2 projectors. Hopefully straight swap, same globes.

Cheers for any info.

Oh, i will be purchasing one or the other from just jap, so if they read this and have any info that would be great too.

Link to comment
https://www.sau.com.au/forums/topic/333825-n1-or-projector-headlights-for-me/
Share on other sites
funkymonkey Grand Master

funkymonkey

Posted
Posted

There's no such thing as N1 headlights, you either have poverty pack headlights (apparently N1's), series 1 projectors or series 2 projectors. Also, no such thing as an M-Spec R32. So I'm guessing you just confused the crap out of everyone with your post, hence no replies.

What you want to know is if you can upgrade to S2 projectors, or downgrade to poverty pack headlights on your S2 R32 GTSt Type M (which for some reason has S1 headlights? How does a 93 model R32 end up with S1's, the transition was in mid 1992).

The answer is yes you can, but you'll need to splice the right sockets for the bulbs as the bulbs are different between all 3 sets and your foglights.

NRV155 Proficient

NRV155

Posted
  • Author
Posted

Ahh, i meant type m, sorry. Yeah, a bit suss with the s1 headlights on a 93 model. The front bar is also a different shade of burgundy too, so im guessing it was in an accident before i bought it or something. Was from an importer so must have been done in japan?. Anyways thanks for the info. Basically no matter what i change to, there will be extra work involved.

I did a search and found the thread on the povo pack explanation but nothing on changing over to them. Thanks again.

funkymonkey Grand Master

funkymonkey

Posted
Posted

Well if the lights were changed over before, you might be lucky and have both plugs that you need to upgrade back to S2 projectors. Might be worth checking behind the headlight.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...