Jump to content
SAU Community

Slight Miss On Idle Rb25det

kidafa

By kidafa,
in Engines & Forced Induction

 Share

Recommended Posts

kidafa Veteran

kidafa

Posted
Posted

Hi Guys,

I've searched and had a thread in general maint. with no luck so here goes:

I currently have a slight miss on idle. Car is a stagea series one (pre Neo engine).

Its only ever so slight that you must concentrate very hard on the tacho to notice it at all, best way to tell when its happening is to stand next to the exhaust when its idling and listen for the slight change in exhaust tone for a split second. Looking at a digital RPM read out it drops only about 30rpm when it does it.

So far I have done this:

Pulled all plugs and checked them and coil packs (Splitfires)

Pressurised intake system to check for leaks with no signs except rocker cover gaskets

Replaced rocker cover gaskets and halfmoons

Cleaned airflow meter

Cleaned throttle body

Checked 02 Voltages on Consult

What else could it be? Could it just be running really rich?

Ive only really noticed it since Ive put a manual gearbox in it.

What else should I try, I was thinking maybe clean the AAC valve again (did it only a few months ago), replace the plugs even though the current ones have only done 2,500k's?

Car runs fine elsewhere except for some form of cut either boos fuel or rich and retard when i really load up the engine eg. full throttle up hill in a gear to high, reason i want to fix up this miss is so I can get the SITC, SAFC and EBC tuned to get rid of this cut im experiencing.

Sorry for the long post.

Cheers, Chris

Link to comment
https://www.sau.com.au/forums/topic/334029-slight-miss-on-idle-rb25det/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • Kinkstaah
      My BMW 335i

      By Kinkstaah · Posted

      I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...