Jump to content
SAU Community

Recommended Posts

ROTA BOOST 18x9 GOLD +30 $1295

ROTA SVN 18x9 +30 Matt Grey $1349

ROTA DPT 18x9 +25 Flat Black $1399

ROTA GKR (first set in Australia) 18x9.5 ET30 Gunmetal $1399

ROTA GTR (P45-R) 19x10 +20 Gunmetal $1695

ROTA TORQUE DRIFT 17x9 +35 $1195

Pictures can be found on www.rotaaustralia.com.au

Please call the office on 0754749254

Link to comment
https://www.sau.com.au/forums/topic/334228-rota-wheels-sau-specials/
Share on other sites

I bought a set a little while ago in Matt black.

They're quite light, of course they're not as light as a set of jap wheels that are 3 times the price. They're the only non jap 18" wheel that vie found that can take 380mm brakes with monoblock calipers.

If you hit a pothole and bend one, there's local support etc.

Worth buying.

Are there any clearance Grid Drift in 18" in Flat black?

Also can't seem to find a list of offsets on the Rota Australia website, or wheel weight in the wheel weight pdf. Do you have a list of offsets?



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...