Jump to content
SAU Community

Recommended Posts

mate your asking TOO MUCH, 3500 and a daily driver? your dreaming for the condition it is in

ill be surprised if you get more that 3500 for it straight up

im looking for an s13 but cmon thats a steep ask

ok dude fair call . :P

WHAT I SHOULD HAVE SAID WAS

$3500 and your daily shitter !!! :D

But getting $3500 for it ( as is ) i didnt think was stupid at all tho ,

if you can find me a 5spd sr20det blacktop with same or less mods with rego in better condition for cheaper than 5k ....

PLEASE SHOW ME WHERE?

As i must have missed them going through the (clean) STOCK , AUTO , ca18det and unregistered s13's on car sales that are being advertised for 3-6k ?? :)

mabey CAR SALES was my first stuff up???

so i had a look on NISSAN SILVIA.com , ok YES there are way better bargain's there compared to carsales.com which has just become the new trading post !!! ;):P

but NOTHING THIS CHEAP.

I mean seriously WTF ? I know the paint is rat shit ?

But i take your constructive criticism on board Dylan and ask you to PLEASE PM ME AN OFFER THAT YOU YOURSELF WOULD PAY FOR A S13 IN THIS CONDITION??

AND PLEASE , IF IAM SO DEAD WRONG WITH THIS PRICE PLEASE SHOW ME SOME OTHER s13's (like mine) that are cheaper than $4000??

if you can i will be sure to advertise this CAR FOR MUCH CHEAPER!!!!

but for now I AINT FOUND SHIT.......

  • 4 weeks later...
ok dude fair call . :P

WHAT I SHOULD HAVE SAID WAS

$3500 and your daily shitter !!! ;)

But getting $3500 for it ( as is ) i didnt think was stupid at all tho ,

if you can find me a 5spd sr20det blacktop with same or less mods with rego in better condition for cheaper than 5k ....

PLEASE SHOW ME WHERE?

As i must have missed them going through the (clean) STOCK , AUTO , ca18det and unregistered s13's on car sales that are being advertised for 3-6k ?? :)

mabey CAR SALES was my first stuff up???

so i had a look on NISSAN SILVIA.com , ok YES there are way better bargain's there compared to carsales.com which has just become the new trading post !!! :/:P

but NOTHING THIS CHEAP.

I mean seriously WTF ? I know the paint is rat shit ?

But i take your constructive criticism on board Dylan and ask you to PLEASE PM ME AN OFFER THAT YOU YOURSELF WOULD PAY FOR A S13 IN THIS CONDITION??

AND PLEASE , IF IAM SO DEAD WRONG WITH THIS PRICE PLEASE SHOW ME SOME OTHER s13's (like mine) that are cheaper than $4000??

if you can i will be sure to advertise this CAR FOR MUCH CHEAPER!!!!

but for now I AINT FOUND SHIT.......

lool think about it, 4k for your car then rust removal around sunroof or else no point respraying, repair the dent and the scrapes, full body respray, replace heavy duty clutch and then a new set of suspensions. The total all up would be more then a normal undamaged s13 sr20det. People know what they have to do if they decide to buy your car hence the trouble you have selling it and the low prices which are actually reasonable.

lool think about it, 4k for your car then rust removal around sunroof or else no point respraying, repair the dent and the scrapes, full body respray, replace heavy duty clutch and then a new set of suspensions. The total all up would be more then a normal undamaged s13 sr20det. People know what they have to do if they decide to buy your car hence the trouble you have selling it and the low prices which are actually reasonable.

so i will put some good coilovers and spray it fix the clutch then what...

You'd probably still get on here and put your 2 cents in where its not needed .

f**k OFF UNLESS YOU ARE INTERESTED IN MAKING AN OFFER !!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...