Jump to content
SAU Community

Recommended Posts

1995mdl NISSAN SKYLINE GTR V-SPEC

Rare midnight Purple, Highly modified 375kw at all 4 wheels on c16, has run a 10.8sec down the quater mile with video footage.

Detuned to 300kw at all 4 wheels for daily driving

HERE`S A LIST OF MODIFICATIONS

-Twin Garrett 2560/7 roller bearing turbo`s

-Bottom end balanced and blueprinted

-Forged cp pistons

-Eagle con rod`s

-Apexi power fc + hand controller

-2x z32 airflow metres

-720cc sard injectors

-Aftermarket intercooler kit

-Custom surge tank

-Bosch 044 fuel pump

-GReddy turbo timer

-GReddy profec B-spec2 boost controller

-GReddy adjustable cam gears

-Brand new genuine nissan r33 gtr crankshaft

-ACL main bearings

-ACL big end bearings

-N1 oil pump

-N1 spec water pump

-Custom oil catch can

-Extreme extra heavy duty twin plate clutch

-Full 3inch exhaust system (jap branded)

-K&N pod filters

-Genuine GTR floor mats

-Recaro drivers seat

-Stern alloy wheels with 4x275`s, 90% tread (doesnt come with bbs wheels in photo)

-Top of the range alarm system

-Stewart warner boost & temp gauges

This is a regretful sale (have other commitments) (Baby on the way)

VEHICLE IS IN EXCELLENT CONDITION FOR AGE

Merticulously maintained, Vehicle has just had a service and dyno tune less than a 1000km`s ago.

All receipts for engine rebuild will be provided with sale. The car can be driven daily or can be used as a weekend (Rocket) cruiser, Genuine reason for sale price is well under replacement cost. Please no time wasters, test pilots or unrealistic offers.

CONTACT ME ON 0401-579-031 FOR MORE INFORMATION

$32.000 ono

post-44841-1283680136_thumb.jpg

Edited by GTRSayan
Link to comment
https://www.sau.com.au/forums/topic/335656-fs-300kw-daily-r33-gtr/
Share on other sites

  • 1 month later...
  • 3 months later...

1995mdl NISSAN SKYLINE GTR V-SPEC

Rare midnight Purple, Highly modified 375kw at all 4 wheels on c16, has run a 10.8sec down the quater mile with video footage.

Detuned to 300kw at all 4 wheels for daily driving

HERE`S A LIST OF MODIFICATIONS

-Twin Garrett 2560/7 roller bearing turbo`s

-Bottom end balanced and blueprinted

-Forged cp pistons

-Eagle con rod`s

-Apexi power fc + hand controller

-2x z32 airflow metres

-720cc sard injectors

-Aftermarket intercooler kit

-Custom surge tank

-Bosch 044 fuel pump

-GReddy turbo timer

-GReddy profec B-spec2 boost controller

-GReddy adjustable cam gears

-Brand new genuine nissan r33 gtr crankshaft

-ACL main bearings

-ACL big end bearings

-N1 oil pump

-N1 spec water pump

-Custom oil catch can

-Extreme extra heavy duty twin plate clutch

-Full 3inch exhaust system (jap branded)

-K&N pod filters

-Genuine GTR floor mats

-Recaro drivers seat

-Stern alloy wheels with 4x275`s, 90% tread (doesnt come with bbs wheels in photo)

-Top of the range alarm system

-Stewart warner boost & temp gauges

This is a regretful sale (have other commitments) (Baby on the way)

VEHICLE IS IN EXCELLENT CONDITION FOR AGE

Merticulously maintained, Vehicle has just had a service and dyno tune less than a 1000km`s ago.

All receipts for engine rebuild will be provided with sale. The car can be driven daily or can be used as a weekend (Rocket) cruiser, Genuine reason for sale price is well under replacement cost. Please no time wasters, test pilots or unrealistic offers.

CONTACT ME ON 0401-579-031 FOR MORE INFORMATION

PRICE DROP $27.000 Neg

  • 2 weeks later...

1995mdl NISSAN SKYLINE GTR V-SPEC

Rare midnight Purple, Highly modified 375kw at all 4 wheels on c16, has run a 10.8sec down the quater mile with video footage.

Detuned to 300kw at all 4 wheels for daily driving

HERE`S A LIST OF MODIFICATIONS

-Twin Garrett 2560/7 roller bearing turbo`s

-Bottom end balanced and blueprinted

-Forged cp pistons

-Eagle con rod`s

-Apexi power fc + hand controller

-2x z32 airflow metres

-720cc sard injectors

-Aftermarket intercooler kit

-Custom surge tank

-Bosch 044 fuel pump

-GReddy turbo timer

-GReddy profec B-spec2 boost controller

-GReddy adjustable cam gears

-Brand new genuine nissan r33 gtr crankshaft

-ACL main bearings

-ACL big end bearings

-N1 oil pump

-N1 spec water pump

-Custom oil catch can

-Extreme extra heavy duty twin plate clutch

-Full 3inch exhaust system (jap branded)

-K&N pod filters

-Genuine GTR floor mats

-Recaro drivers seat

-Stern alloy wheels with 4x275`s, 90% tread (doesnt come with bbs wheels in photo)

-Top of the range alarm system

-Stewart warner boost & temp gauges

This is a regretful sale (have other commitments) (Baby on the way)

VEHICLE IS IN EXCELLENT CONDITION FOR AGE

Merticulously maintained, Vehicle has just had a service and dyno tune less than a 1000km`s ago.

All receipts for engine rebuild will be provided with sale. The car can be driven daily or can be used as a weekend (Rocket) cruiser, Genuine reason for sale price is well under replacement cost. Please no time wasters, test pilots or unrealistic offers.

CONTACT ME ON 0401-579-031 FOR MORE INFORMATION

$27.000 ono price drop

post-44841-0-73100100-1298291443_thumb.jpgpost-44841-0-73100100-1298291443_thumb.jpgpost-44841-0-96376600-1298291607_thumb.jpgpost-44841-0-79325100-1298291741_thumb.jpgpost-44841-0-60618200-1298291886_thumb.jpgpost-44841-0-68350000-1298291964_thumb.jpg

The car has no handling or brake mods. wouldnt mind a set of tein super streets.

The turbos are fresh since the rebuild there on around 6000 kms and running excellent. Strong pull all the way through.

I dnt have a copy of the dyno sheet on my computer i will have to scan it and pm it to you like that, will do that as soon as i can

Cheers mate,

Just a few more questions...how many km's has the car done? What psi are u runnin for 300kw and wot were u running for 375kw? Also did u hav the same turbos when you had the car running at 375kw? Dont -7's top out at about 330? Finally who tuned your car?

Cheers

George

the chassis on 75000 (genuine) The motors on 6000 since rebuild. the cars currently on 18psi and was on 26 when 375kws. i had the -7s whhen running 375kws and no there max isnt 330. you can push 350kws on N1s wich are smaller than the -7s so yea. and last but not least the car always gets tuned by dom from protek in preston.

any more questions feel free to ask.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...