Jump to content
SAU Community

Gtr Rb26dett Injectors Into Rb25det

HR31-PASSAGE

By HR31-PASSAGE,
in Engines & Forced Induction

 Share

Recommended Posts

HR31-PASSAGE Veteran

HR31-PASSAGE

Posted
Posted

Hey guys i'm getting some cheap Gtr rb26dett Injectors with custom fuel rail & i'm planing on using them on my s2 rb25det.

So the question is will the gtr injectors fit to my rb25 injector loom?

& i've also been told the resistance is different between the 26 & 25 injectors? What would i have change/setup to run these 26 injectors with my stock ecu? (& yes i plan on getting the ecu retuned after this mod is done)

any help would be great :thumbsup:

cheers luke

Link to comment
https://www.sau.com.au/forums/topic/336205-gtr-rb26dett-injectors-into-rb25det/
Share on other sites
HR31-PASSAGE Veteran

HR31-PASSAGE

Posted
  • Author
Posted
how cheap? i reckon get some highflow stockers cheap and then all you need is retune

got them with a plenum i brought just waiting on them to turn up in the post. but i've head all sorts of story's on installing them into the rb25 so sticking with the gtr ones as they come with a custom fuel rail also

Moodles2 Grand Master

Moodles2

Posted
Posted

RB26 ECUs run low impedance injectors with a resistor pack (like: http://justjap.com/store/product.php?produ...at=0&page=1 ). Whereas RB25 injectors are high impedance type, RB25 ecus expect high imp injectors.

HR31-PASSAGE Veteran

HR31-PASSAGE

Posted
  • Author
Posted
RB26 ECUs run low impedance injectors with a resistor pack (like: http://justjap.com/store/product.php?produ...at=0&page=1 ). Whereas RB25 injectors are high impedance type, RB25 ecus expect high imp injectors.

so i should get my hands on the rb26 gtr injector loom & the resistor pack & the injectors will work fine with the rb25det ecu right? thanx

  • 2 years later...
GTSBoy Grand Master

GTSBoy

Posted
Posted

You guys do realise (?) that you can't just run different injectors on an RB25 ECU, because in the first instance, if you do no tuning, the mixtures will be all wrong, and in the second instance, you can't tune the 25 ECU easily. You have to change ECU to change injectors.

Willis Proficient

Willis

Posted
Posted

I should have been more specific, i have a RB20 Nistune ECU that can run RB26 injectors so long as a resistor pack (which i have) is wired in. It can also run a RB25DET..

Is there any physical difference injector to injector, i've read that they are a tight fit in the side feed rail but apart from that?

Top feed rails can be fitted to RB25's.. would this work with 26 injectors?

Ta!

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Most women will agree that parking is the most taxing part of driving

      By soviet_merlin · Posted

      I'd be worried about having to parallel park a boat like that. Magnificent car though.
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • MBS206
      new 1.5 LSD issues/concerns

      By MBS206 · Posted

      Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
×
×
  • Create New...