Jump to content
SAU Community

Recommended Posts

Ok, so I got my car registered on Monday, finally, and it passed it's inspection first go with all but the window washer motor (front) not working.

After taking it for it's first decent drive (and having an exhaust mount break) all seemed to be ok, still needs some tlc but nothing major.

Day 2 and all is well for the drive to tafe, but when I left to come home car was hard to start, wouldn't idle at all, and all the dash lights were staying on (reds) charge, fuel, brake ect. Volts gauge is showing normal reading and car will run if you keep the rev's up it. No blown fuses not sure where I should start probing......any ideas?

Cheers Dan

Link to comment
https://www.sau.com.au/forums/topic/336215-c210-electrical-gremlins/
Share on other sites

Sounds like an alternator issue mate. When mine blew up my dash lit up like a christmas tree. Found a replacement at the wreckers off another l series motor for cheap and has been fine for almost 2 years.

Sounds like an alternator issue mate. When mine blew up my dash lit up like a christmas tree. Found a replacement at the wreckers off another l series motor for cheap and has been fine for almost 2 years.

Thank you sir,

I was hoping that was the case as I haven't had time to look at it yet, but really don't want to be chasing a short somewhere in the loom/s. Would consider an engine conversion before doing that :thumbsup:

Can I use an alternator off any l series motor l16,l18,l20?

As far as i know yes. But someone please correct me if im wrong.

Another thing that happened to me is i kept driving it till the battery went flat so probably avoid doing that if possible lol. It's a pain in the ass.

  • 2 weeks later...

Well I got my alternator reco'ed but the problem persisted, turned out to be a dodgy fusible link (alternator bearings where shagged anyway)

Dose anybody know what the correct rating for the 4 fusible links is(red, 2 x green, brown). As well as the main link from battery "+" terminal?

Considering changing to a newer style fusible link like some of the 240z guys are doing.

Cheers Dan

There are a few makes of alternator for the L series (hitachi and bosch from memory). While all the L series alternators physically fit the C210, some have a single pin plug in the back, and others use a twin pin plug. The plug can be removed and replaced, but the plug and bushes are all in the one assembly, and often worn bushes are causing crappy charging in the first place.

Unless its a dodgy fusible link, blown diodes, or clapped out bearings, of course.

Again, from memory, if you use the single plug system it still actually works, but you get an annoying warning light on the dash.

Well I got my alternator reco'ed but the problem persisted, turned out to be a dodgy fusible link (alternator bearings where shagged anyway)

Dose anybody know what the correct rating for the 4 fusible links is(red, 2 x green, brown). As well as the main link from battery "+" terminal?

Considering changing to a newer style fusible link like some of the 240z guys are doing.

Cheers Dan

Hi i think i can help you with your fusible link ratings.. ""brown link"" 0.3. ""green link 0.5. ""red link 0.85. ""black link 1.25.

Also i would check the voltage regulator, if you still have the old points system, convert to a electronic one

this only applies if you have a 50amp alternator, the efi skyline had a 60amp alternator with inbuilt regulator.

Cheers Mario.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...