Jump to content
SAU Community

Recommended Posts

Anyone know how to run aircon diagnostics?

I have R32 skyline, and the aircon keeps turning itself off all the time. I have had it checked and was told everything is now fine except it stops blowing cool air for a while. The auto-electrician couldn't find out why, and said he had another one that does the same thing.

Any help anyone can give me will be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/
Share on other sites

Its a while since I've done this, so here goes:

Turn ignition to ON.

Hold down the (A/c) OFF button for about 5 sec. I think it starts having a 'flash' attack.

Use HOT / COLD buttons to move through the various diagnostic tests that it carries out.

Any errors will be flashed as a number after its all over.

Turn off ignition to cancel diagnostics.

Advice - make sure you park the car in full sunlight to avoid error 26 (sunlight sensor).

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-56834
Share on other sites

Compressor is now fine...did have aproblem but it is now sorted. The problem I now have is ever five minutes or so the a/c blows outside air in, not cooling it.

Auto electrician said it is most likely a sensor somewhere not working properly, and if i can find out how to do diagnostics it may help.

Thanks a lot blind_elk, will give it a go tomorrow, in the sunlight. Do you know what the different numbers mean?

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-57258
Share on other sites

NIZ30,

Should be getting word from my importer any day now!!,then I'll have a GTR front cut!!(but before they could send it but it fell off the forklift:mad: ,landed on the gearbox and nearly broke in two!)

Sure next time I see you in the centre parking, Ill stop to have a chat!!

MEGA

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-59290
Share on other sites

You should go out to the next meet at Benarby.

A class specificly for imports and 4's.

Should be real good, i hear people from bundy & rocky coming just because of that.

If i have a fourth gear by then i will come back for this. You should get decent times, 4wd and all.

Who's your importer?

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-59299
Share on other sites

Aria jap are the guys importing the front cut for me there in sydney!(couple of jap guys that don't talk much english though)

Yeah I could go but with no manual and turbo lag I would only get a high 15, so why bother to go if you only get laughed at!!!

By the way I crashed the R6(blue motorbike) two weeks ago!!! lucky to be alive today because I landed on my head after collecting a trailer!!(shh probably over 110ish impact speed)will lose licence though!! Not injured though! back at work the next day!!

MEGA

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-59309
Share on other sites

This must be the thread?

http://forums.skylinesaustralia.com/showth...highlight=garth

Thanks NIZ30 I will give him a call next time I need something!! I actually heard that there was a importer in Rocky but didn't know how to get in contact with them!

MEGA

:( :whip: :lol:

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-60780
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
×
×
  • Create New...