Jump to content
SAU Community

Recommended Posts

r32 drivers side guard, in perfect codition, in primer, ready for paint $80 (THE ONE IN PRIMER, BAD PIC SORRY)

eiow3r.jpg

4door r32 spoiler type a very rare, COMES WITH brake light $120 or make me an offer, comes with the two rubber seals in perfect condition, spoiler is in immaculate condition now $50

9s6i4l.jpg

qy7f9z.jpg

r32 rear bar does not come with reverse lights as on has broken only rhs reverse light is available

$70 or nearest offer YES IT IS A TYPE M REAR BAR

sc9cgm.jpg

r32 boot TYPE M in navy blue, comes with lock and is in perfect conidiotn has type m rear spoiler in blue as well

$70 or nearest offer

f2itj6.jpg

r32 front strut brace, in good condition, used only once on a car for like 200 km if that then the car was stripped

$120 ono

2zzq9vb.jpg

r32 cluster surround, manual type m in good condition all mounting points are there

not sure what they re worth but i know they re always cracking $80

34s48jc.jpg

r32 cluster surround, auto type m in good condition all mountin points are there and not broken

$50

dxy4pt.jpg

r32 gtr seats, PERFECT CONDITION PASSENGER SIDE make an offer

dsc04582zt.th.jpg

dsc04583z.th.jpg

dsc04584v.th.jpg

dsc04585dr.th.jpg

located in western suburbs melbourne

pm or call 0413 926 794

not keen on shipping seats

cluster surround is in perfect nick mate, that would be hard to ship as well but if your GENUINELY interested please pm as i never check my topics sorry for the late reply

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...