Jump to content
SAU Community

R32 Gtr Rolling Shell, Rb26 Ported Head, Other Big Parts


Recommended Posts

Hi people,

Ive been building up an engine/car for a while, but now it all has to go unfortunately.

So, here goes for a start.

R32 GTR rolling shell, immaculate body, its still registered. has a stock bonnet now.

comes with everything except the motor and gearbox.

will get updated pictures, no longer has shopping list stickers

$8000

post-49273-1284975456_thumb.jpg

post-49273-1284975482_thumb.jpg

post-49273-1284975506_thumb.jpg

post-49273-1284975551_thumb.jpg

RB26 Head, has never been fitted since built.

bronze valve guides

1mm Over Size valves

supertech buckets

280 10.8 camshafts

springs to suit

machined to fit cams

Big port job

$6500ono

post-49273-1284976192_thumb.jpg

post-49273-1284976219_thumb.jpg

post-49273-1284976244_thumb.jpg

post-49273-1284976266_thumb.jpg

post-49273-1284976296_thumb.jpg

post-49273-1284976319_thumb.jpg

6boost manifold, brand new, twin scroll T4 flange $1300ono

Tomei cam gears, brand new, $450ono

Fuel setup, carter lift pump, 2x044 pumps, 4l surge tank, 2x filters,speedflow fittings $1000ono

Aeromotive FPR, Greddy twin entry fuel rail, braided lines to and from FPR, speedflow fittings $1000ono

thats all i can think of for now.

contact via PM.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
    • The fact that US/JDM plates actually fit the skyline bumpers properly is a big, big thing for me as they are the correct dimensions. Annoyingly you can't opt for a normal plate (or plate combination) in that size. You have to make up your own one, and at that point you'd still know it wasn't randomly assigned. 
    • Well, really, that's any ECU, because it's not so much the ECU that the tuner connects to, but a laptop that's connected to the ECU. You have to have the tuning software installed locally. The "remote" part is essentially just remote desktop (RDP) or VNC type access. Nevertheless, if you're looking to upgrade, then you're immediately in the Haltech/Link territory, both of which can be done by any number of competent tuners here in Oz. But without a dyno, you'll definitely also need a wideband O2 sensor fitted, and you'll probably be relying on "auto" tuning a bit, where you drive it around under various loads and then apply the corrections that the ECU learns (basically applying the fuel trims that the ECU has to do to correct the mixtures). Tuning the timing is a little harder. It can be difficult to trust the old OEM knock sensors on RBs, so it is definitely best to have someone who knows what they're listening for, with knock ears (a piezo microphone connected to the engine, and and little amp and headphones so the listener can hear the angry men with hammers who live in the engine). That is more difficult to do remotely, and I suspect the only sane way is to be quite conservative on timing. But that's OK. You're probably waaaaay better off with conservative timing where you are. What is the fuel situation? 98RON available? Or low grade jungle juice?
    • I see your point, I didn't think too deep into it, was purely focused on the price. There's no bad blood between myself and GSM, they acknowledged the price was cheaper else where and at the time couldn't match it. 
×
×
  • Create New...