Jump to content
SAU Community

R32 Gtr Rolling Shell, Rb26 Ported Head, Other Big Parts


Recommended Posts

Hi people,

Ive been building up an engine/car for a while, but now it all has to go unfortunately.

So, here goes for a start.

R32 GTR rolling shell, immaculate body, its still registered. has a stock bonnet now.

comes with everything except the motor and gearbox.

will get updated pictures, no longer has shopping list stickers

$8000

post-49273-1284975456_thumb.jpg

post-49273-1284975482_thumb.jpg

post-49273-1284975506_thumb.jpg

post-49273-1284975551_thumb.jpg

RB26 Head, has never been fitted since built.

bronze valve guides

1mm Over Size valves

supertech buckets

280 10.8 camshafts

springs to suit

machined to fit cams

Big port job

$6500ono

post-49273-1284976192_thumb.jpg

post-49273-1284976219_thumb.jpg

post-49273-1284976244_thumb.jpg

post-49273-1284976266_thumb.jpg

post-49273-1284976296_thumb.jpg

post-49273-1284976319_thumb.jpg

6boost manifold, brand new, twin scroll T4 flange $1300ono

Tomei cam gears, brand new, $450ono

Fuel setup, carter lift pump, 2x044 pumps, 4l surge tank, 2x filters,speedflow fittings $1000ono

Aeromotive FPR, Greddy twin entry fuel rail, braided lines to and from FPR, speedflow fittings $1000ono

thats all i can think of for now.

contact via PM.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...