Jump to content
SAU Community

Recommended Posts

Guys/Horders chasing the following.

A pair of the plastic triangle covers behind the mirrors on a 2 door DR30 (New or used, must be in 1 piece)

A pair of the rubbers that go on the mirrors to suit a 2 door DR30 (New or slightly used)

I know they are rarer than rocking horse white, but I'm a fair man and willing to pay for them.

My rubbers simply fell apart upon removal of the mirrors for the respray.

Cheers,

Steve

Link to comment
https://www.sau.com.au/forums/topic/337819-wtb-rocking-horse-poo/
Share on other sites

All discontinued :(

Jenesis, omote, Nissan all have nothing!

Point of interest too, the Guy who does the carbon work at Jenesis has left, so they only have the stock on hand left. No carbon instrument surrounds left ;)

Edited by masTers
Sedan/hatch are diferent to the coupe too!

And early HR is different to late HR/DR (fender vs. door mirrors)

I bought 2 sets of what I thought were the right ones, only to find out that they were for 'fender' HR's... I finally go the right ones via Omote/Yahoo! a couple of years ago.

If it's what I think your talking about, "the triangular parts the mirror mounts to" ??? The early parts are now out of production, along with the filler piece and 2ndhand is the only way for these early front fender mounted rear view mirrors. The later model items are possibly available but I need to know exactly what I'm looking at.

Cheers, D

Your image shows the window channel/seal (in reasonable condition), the remnants of the 'mirror seal' and the plastic section. I'm assuming the pieces in question are the 'mirror seal' that goes over the mirror mount plus the plastic clip in triangle (the one that keeps falling off on my passenger side...). Mine too fell apart when I got the car in '02 (I finally found the import paperwork tonight!)

mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm!

I might be taking mine off the DR trackstarr and try fitting early series mirrors so I don't risk breaking the later model electric mirrors playing Fangio. I probably have about 6 spare doors I can look at, so I'll look tomorrow and so on.

I'm surprised they are not available ex Japan, but I guess everything for these cars will be in the same boat eventually.

I'm looking for a 3.9:1 R200 diff too, open will suffice as I have 3 x 4.11:1 LSD's I can play with.

I'll reply if I'm successful.

Have you tried glueing them in situe with something black.

Cheers, D

makes me feel like an arse, because I have been meaning to buy new rubbers for my mirrors for the last 2 years, except recently when I was finaly got around to it I found out they are out of stock :blink:

Does anyone know if nissan do a re-run of spares every so often?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...