Jump to content
SAU Community

Recommended Posts

Hey guys,

A clean up of my last thread. Turbo is sold! So here goes.

* RB25DET - 127xxxKM, cyl 6 slightly less compression than the other 5 on 180. Manifolds included, no injectors or rail. $1000 (have interest already)

* R33 RB25DET 5 Speed Gearbox conversion - 127xxxKM, runs well, car is mostly stock and has not had much abuse. Stock clutch, pedal, lines, etc ra ra ra, all included. $1200 FIRM.

* 700cc Injectors - High flows, just done, flow matched work perfectly. In factory rail with reg $450

* Z32 AFM with plug - Near new bosch item purchased from justjap not long ago $200

* Splitfire S1 coilpacks - $400

* Stock coilpacks in good condition - $100

* Stock R33 crossover pipe with BOV - $80

* Stock R33 intercooler - $80

* R33 alternator $80

* BRAND NEW JJR Stealth FMIC. Fitted and driven back in the garage before my turbo sold. I paid $550 from Just Jap 2 weeks ago. Yours for $480 Firm.

* R33 Engine wiring harness, coilpack and injector harness included. VGC. Unmolested - $150

* HKS mushroom pod filter. Suits RB and Z32 AFMs, bolts into place. - $100

* R33 stock shocks and springs - $100

* R34 stock shocks only - $50

* RSR Ti2000 springs, suit R33/34 (I think R32 also) - $100

More to come as I strip the engine bay. Postage on smaller items, pickup only on larger.

Bankstown area Sydney.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/338255-fs-r33-goodies-stock-moded/
Share on other sites

* 700cc Injectors - High flows, just done, flow matched work perfectly. In factory rail with reg $450

* Z32 AFM with plug - Near new bosch item purchased from justjap not long ago $200

Are you neg on the above items? and would you do a better deal if purchased together?

Cheers Jason

Injectors and AFM SOLD

Added:

* R32 ecu socketed and remapped for 3037 (3076R), 700cc, Z32 - $150

* R33 RB25DET factory ecu - $100

* Green label RB afm - $100

Gearbox is now $1200 with fork/slave/clutch/flywheel

Pedal box and master will be kept for my conversion.

This price is generous as it is, no more low balls.

Cheers

  • 2 weeks later...
  • 1 month later...
  • 5 weeks later...

Hey guys,

Very sorry for ignoring my thread for so long, possibly best to PM in future.

Geabox is now sold, clutch and flywheel assy still available.

Long motor still available.

Stock shocks and springs in regular old condition, pics available - no obvious leaks or anything and they drove fine.

RSR springs were actually for an R34 and dropped the car to a good height. I have a photo of the front of my car if still interested (with the RSR's fitted)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...