Jump to content
SAU Community

Recommended Posts

Ok guy's big part sale need these parts gone... asap as i want 2 make room for my s15 project.

1. s15 Dmax rear fenders 50mm $375

post-61803-12855746343607_thumb.jpg

2. z32 Airflow meter and plug $250

post-61803-12855709172939_thumb.jpg

3. Coustom surge tank and bosch 044 fuel pump with lines $450

post-61803-12855716408617_thumb.jpg

4. Greddy turbo timer $100

post-61803-12855724756352_thumb.jpg

5. Bride seat with r32 gtst seat rails $550

post-61803-12855741880985_thumb.jpg

6. Haltech platinum 1000 and patch loom for s15 $1800

post-61803-1285573672073_thumb.jpg

7. 53mm Koyo radiator $600

8. s14 re-mapped computer $250

9. Standard s15 computer $250

10. Motor, turbo, gearbox setup for sale $14,500

*Arias 40 thou over size forged pistons

*Arias Chrome moly rings

*Scat H-beam rods

*ACL race bearings (main and rods)

*ACL race bearings (thrust)

*Full genuine Nissan gasket set

*HKS multy layer metal head gasket 1.6mm

*HKS heavy duty valve springs

*HKS Camshafts step 3, 264 EX and 272 IN

*HKS adjustable cam gear inlet and exhaust

*Tomei solid lifters

*Tomei rocker stoppers

*Brand new Nissan rocker arms

*ARP mains

*ARP headstuds

*Trust TD06-25G 10cm turbo with polished front comp cover, fully rebuilt and balanced by ATS

*Custom high mount steam pipe manifold

*HKS external gate 48mm with screamer pipe

*Sard 850cc injectors and plugs

*Greddy inlet plenum

*Xtreme custom made GTR clutch to suit SR20 1600kgs solid centre with Moly flywheel

*RB25DET gearbox with custom bellhousing

*Head was faced, valve stems seals, acid dipped

*Block has been bored, faced, tunnel bored, crack tested, honed, acid dipped, crankshaft crack tested, timing chain cover machined to suit both all done by Chris Milton Engine Developments.

post-61803-12855752762786_thumb.jpg

11. r32 gtst rolling shell with loads of suspension parts! $6,000

Suspension:

Ohlins Coilovers

Adj Castor Rods

Adj Upper Arms

Adj Whiteline swaybars

R33 Lower control arms

Offset rack spacers

NP Wonder knuckles

Solid Alloy steering Spacer

Rear Adj Camber arms

Solid mounted rear cradle

Hicas Lock bar installed and all hicas lines and pumps removed from the car

044 intank pump

Interior:

Hydraulic handbrake

5 point safety harness

Fire extinguisher

Trust boost gauge

Nismo 260k dash cluster

Body:

Monkey warehouse Uras body Kit

Standard r32 gtst rims not the 1's in the pic

post-61803-12855754056925_thumb.jpg

12. Nissan 200sx s14 s1 $14,500

*Twin thermo fans

*Exedy heavy duty clutch and fly wheel

*Blitz pod filter

*s15 motor (110,000 kms)

*s15 6 speed

*s15 suspension

*s15 rear end diff, hubs axles ect.

Interior:

*Pioneer head unit

*6 inch pioneer speakers

*Velo race seat

*Fire extinguisher

Exterior:

*Full JDM Aero Kit

*Amazon Green(Standard)

*Rolled Front Guards

*Pumped/Lipped Rear Guards

*Removed Standard Wing

*Origin Front Clear Indicators

*Commo Spec Clear Guard Indicators

*Work Emotion XC8sF: 18x9.5 +20 R: 19x10 +20

post-61803-12855778460942_thumb.jpg

If any1 wants 2 know anything just ask.

can also get more pics if needed, cheers dave

Link to comment
https://www.sau.com.au/forums/topic/338456-big-parts-sell/
Share on other sites

  • 1 month later...

Price drop want this stuff gone open 2 offers.

Ok guy's big part sale need these parts gone... asap as i want 2 make room for my s15 project.

1. s15 Dmax rear fenders 50mm $375 now $325

post-61803-12855746343607_thumb.jpg

2. z32 Airflow meter and plug $250 now $220

post-61803-12855709172939_thumb.jpg

3. Coustom surge tank and bosch 044 fuel pump with lines $450 now $375

post-61803-12855716408617_thumb.jpg

4. Greddy turbo timer $100 now $80

post-61803-12855724756352_thumb.jpg

5. Bride seat with r32 gtst seat rails $550 now $450

post-61803-12855741880985_thumb.jpg

6. Haltech platinum 1000 and patch loom for s15 $1800 now $1650

post-61803-1285573672073_thumb.jpg

7. 53mm Koyo radiator $600 now $500

8. s14 re-mapped computer $250 now $220

9. Standard s15 computer $250 now $220

10. Motor, turbo, gearbox setup for sale $14,500 now $13,500

*Arias 40 thou over size forged pistons

*Arias Chrome moly rings

*Scat H-beam rods

*ACL race bearings (main and rods)

*ACL race bearings (thrust)

*Full genuine Nissan gasket set

*HKS multy layer metal head gasket 1.6mm

*HKS heavy duty valve springs

*HKS Camshafts step 3, 264 EX and 272 IN

*HKS adjustable cam gear inlet and exhaust

*Tomei solid lifters

*Tomei rocker stoppers

*Brand new Nissan rocker arms

*ARP mains

*ARP headstuds

*Trust TD06-25G 10cm turbo with polished front comp cover, fully rebuilt and balanced by ATS

*Custom high mount steam pipe manifold

*HKS external gate 48mm with screamer pipe

*Sard 850cc injectors and plugs

*Greddy inlet plenum

*Xtreme custom made GTR clutch to suit SR20 1600kgs solid centre with Moly flywheel

*RB25DET gearbox with custom bellhousing

*Head was faced, valve stems seals, acid dipped

*Block has been bored, faced, tunnel bored, crack tested, honed, acid dipped, crankshaft crack tested, timing chain cover machined to suit both all done by Chris Milton Engine Developments.

post-61803-12855752762786_thumb.jpg

11. r32 gtst rolling shell with loads of suspension parts! $6,000 now $4,500

Suspension:

Ohlins Coilovers

Adj Castor Rods

Adj Upper Arms

Adj Whiteline swaybars

R33 Lower control arms

Offset rack spacers

NP Wonder knuckles

Solid Alloy steering Spacer

Rear Adj Camber arms

Solid mounted rear cradle

Hicas Lock bar installed and all hicas lines and pumps removed from the car

044 intank pump

Interior:

Hydraulic handbrake

5 point safety harness

Fire extinguisher

Trust boost gauge

Nismo 260k dash cluster

Body:

Monkey warehouse Uras body Kit

Standard r32 gtst rims not the 1's in the pic

post-61803-12855754056925_thumb.jpg

12. Nissan 200sx s14 s1 $14,500 now 13,000

*Twin thermo fans

*Exedy heavy duty clutch and fly wheel

*Blitz pod filter

*s15 motor (110,000 kms)

*s15 6 speed

*s15 suspension

*s15 rear end diff, hubs axles ect.

Interior:

*Pioneer head unit

*6 inch pioneer speakers

*Velo race seat

*Fire extinguisher

Exterior:

*Full JDM Aero Kit

*Amazon Green(Standard)

*Rolled Front Guards

*Pumped/Lipped Rear Guards

*Removed Standard Wing

*Origin Front Clear Indicators

*Commo Spec Clear Guard Indicators

*r33 gtr rims not the 1 in the pic!

post-61803-12855778460942_thumb.jpg

If any1 wants 2 know anything just ask.

can also get more pics if needed, cheers dave

Link to comment
https://www.sau.com.au/forums/topic/338456-big-parts-sell/#findComment-5524291
Share on other sites

What did you do with the running gear out of the r32 gtst?

Previous owner had "sold" that car to me a couple months back but reneged on the deal as obviously you must have offered more money.

Link to comment
https://www.sau.com.au/forums/topic/338456-big-parts-sell/#findComment-5524306
Share on other sites

What did you do with the running gear out of the r32 gtst?

Previous owner had "sold" that car to me a couple months back but reneged on the deal as obviously you must have offered more money.

putting it in my project car. did you just want the motor gearbox ect.

Link to comment
https://www.sau.com.au/forums/topic/338456-big-parts-sell/#findComment-5524324
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...