Jump to content
SAU Community

S.a - Work Rs Wheel Nuts, Rb 3inch Front Pipe

Jms_31
 Share

Recommended Posts

Jms_31 Collaborator

Jms_31

Posted
Posted (edited)

-Got a set of Blue Work RS Wheel nuts up for sale, 1.5 thread and missing one of the lock nuts, but in perfect condition - $100 which is still cheap considering what they go for new!

-3inch Front Pipe with stock dump still attached, came off my 25 - $50

Will edit this with more stuff over the next few days!

Contact me on here or 0407 633 573 :)

Edited by Jms_31
  • 5 weeks later...
Jms_31 Collaborator

Jms_31

Posted
  • Author
Posted

Bump!! Also got an Origin rear bar and side skirts to suit 32, i think there the Stream design, going off the origin webste. They are currently painted in gun metal grey.

Chasing $200 each or take them both for $350! Side Skirts have a couple of small marks on one and the rear bar is pefect!

Jms_31 Collaborator

Jms_31

Posted
  • Author
Posted

Hey mate i wont be able to get pics of them as im not at home for a few days. There in perfect condition, no cracks or marks on the lenses etc. PM me if you want :devil:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...