Jump to content
SAU Community

To Import Or Not To Import

Sammo169
 Share

Recommended Posts

Sammo169 Rookie

Sammo169

Posted
Posted

Hi, im new to the forum, so please be kind.

I have a budget around $20k, im looking for a later model R32, maybe a v-spec if possible.

This issue i have is obviously to import or not. Having looked on carsguide etc, there are quite alot of GTR's for that money in the country, However I've herd that these cars have usually been flogged quite hard. I get that the car is getting on in years and things break, I've owned an 88 BMW e32 735i so i know what life can be like on the hard shoulder with a bonnet oozing steam, hence why i am questioning are imported cars from japan a better (safer) choice in the long run.

Also, i am aware that there are many posts about importing cars.

i am hoping someone with experience can help point me in the right direction.

Link to comment
https://www.sau.com.au/forums/topic/338765-to-import-or-not-to-import/
Share on other sites
SKITTLES Experienced

SKITTLES

Posted
Posted
Hi, im new to the forum, so please be kind.

I have a budget around $20k, im looking for a later model R32, maybe a v-spec if possible.

This issue i have is obviously to import or not. Having looked on carsguide etc, there are quite alot of GTR's for that money in the country, However I've herd that these cars have usually been flogged quite hard. I get that the car is getting on in years and things break, I've owned an 88 BMW e32 735i so i know what life can be like on the hard shoulder with a bonnet oozing steam, hence why i am questioning are imported cars from japan a better (safer) choice in the long run.

Also, i am aware that there are many posts about importing cars.

i am hoping someone with experience can help point me in the right direction.

Skylines are pretty solid imo. Mine was probably flogged, but it's what you get for buying a skyline.

I just fix problems as they arise and it's been the best fourth months of my life. Certainly reliable once a fresh battery is put in.

Importing imo is safer, only because the car has to pass through the compliance workshop.

I'm telling you now, from the stress of importing, driving that car will feel soooo much better.

Also, it depends what you want. You can get an already imported R32, you just won't have the social stature of "first owner in aus". Nor will you be able to say "I imported my car" but at the same time, you can say "it's a jspec/jdm/OMFG I HAVE A WAKABA LEAF".

Up to you dude, it's purely your personal taste.

tl;dr; Japan could give you a safer deal. But it's stressfull.

Bashed cars in Aus are fine if you're willing to put the work in.

Be careful of cars from japan and make sure they aren't repaired write-offs or anything like that.

GTR-N1 Grand Master

GTR-N1

Posted
Posted

Carlton Melb. or Carlton Syd.?

Top Secret Imports had 3x good R32 GT-Rs last week. One couple were trying to decide on which one, so there could be 2x left atm.

I'd check their website > Garry and Jack are honest dealers, which is why we asked them to be sponsors of the Event below.

djr81 Grand Master

djr81

Posted
Posted
Hi, im new to the forum, so please be kind.

I have a budget around $20k, im looking for a later model R32, maybe a v-spec if possible.

This issue i have is obviously to import or not. Having looked on carsguide etc, there are quite alot of GTR's for that money in the country, However I've herd that these cars have usually been flogged quite hard. I get that the car is getting on in years and things break, I've owned an 88 BMW e32 735i so i know what life can be like on the hard shoulder with a bonnet oozing steam, hence why i am questioning are imported cars from japan a better (safer) choice in the long run.

Also, i am aware that there are many posts about importing cars.

i am hoping someone with experience can help point me in the right direction.

For $20k you are better off finding one locally. You can see it, touch it, hell, fondle it if you want to. You can also do any number of checks to make you happy before handing over the cash.

At the end of the day it is a GT-R & it will have been flogged, irrespective of whether it is ex Japan or has made it to Australia in the last couple years of its 15 year life. If you are overly worried about stuff breaking an R32 is probably not the right choice anyway.

Sammo169 Rookie

Sammo169

Posted
  • Author
Posted (edited)
For $20k you are better off finding one locally. You can see it, touch it, hell, fondle it if you want to. You can also do any number of checks to make you happy before handing over the cash.

At the end of the day it is a GT-R & it will have been flogged, irrespective of whether it is ex Japan or has made it to Australia in the last couple years of its 15 year life. If you are overly worried about stuff breaking an R32 is probably not the right choice anyway.

Its not that im overly worried, its an amazing car and if you havn't driven it to its limits then you you've probably missed out.

Its not a Yaris.

I just was curious about whats the better option for the car at this price.

Im not going to use it as a daily drive, im quite happy to bus to work and save it for the weekend.

Also, where's a good place for servicing? (inner Melbourne/East Melbourne)

Edited by Sammo169
Sammo169 Rookie

Sammo169

Posted
  • Author
Posted (edited)

Thank you for your help, its cleared up a few things.

Does anyone know of any good GTR's for sale in Melb at the moment or know somebody selling?

Edited by Sammo169

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      Have you not seen geospy.ai? It can now give GPS co ords to within a metre from a photo, even if it's a random photo you take inside. Supposedly at the moment only the government/law enforcement has access to that... Supposedly...
    • Komdotkom
      Crank Motorsports Front Axles

      By Komdotkom · Posted

      I've got the rear ones, they're certainly beefy. I need to take them to my driveshaft guru to check over, he's very fussy about the quality of components so I'll let you know if they are made of cheese by a blind man.   Are you in Australia? A mate just had a set of EN26 shafts made for his K20 Lotus by our fabricator which were quite cheap (compared to Driveshaft Shop) so if you can procure the CV's and draw what you need he'd make them for ~$800 for the pair.
    • Josh K.
      Crank Motorsports Front Axles

      By Josh K. · Posted

      Had I known the diff between R32 and R33 suspension I would have R33 suspension. That ship has sailed so I'm doing my best to replicate a drop spindle without spending $4k on a Billet one.
    • Josh K.
      Crank Motorsports Front Axles

      By Josh K. · Posted

      OEM suspension starts to bind as soon as the car gets away from stock height. I locked in the caster and camber before cutting off the kingpin. I then let the upright down in a natural (unbound) state before re-attaching it. Now it moves freely in bump and droop relative to the new ride height. My plan is to add GKTech arms before the car is finished so I can dial camber and caster further. It will be fine. This isn't rocket science. Caster looks good, camber is good, upper arm doesn't cause crazy gain and it is now closer to the stock angle and bump steer checks out. Send it.
    • GTSBoy
      Crank Motorsports Front Axles

      By GTSBoy · Posted

      Pay careful attention to the kinematics of that upper arm. The bloody things don't work properly even on a normal stock height R32. Nissan really screwed the pooch on that one. The fixes have included changing the hole locations on the bracket to change the angle of the inner pivot (which was fairly successful but usually makes it impossible to install or remove the arm without unbolting the bracket from the tower, which sucks) and various swivelling upper arm designs. ALL the swivelling upper arm designs that look like a capital I (with serifs) suck. All of them. Some of them are in fact terribly unsafe. Even the best one of them (the old UAS design) shat itself in short order on my car. The only upper arm that works as advertised and is pretty safe is the GKTech one. But it is high maintenance on a street car. I'm guessing that a 600HP car as (stupidly, IMO) low as you are going is not going to be a regular driver. So the maintenance issues on suspension parts are probably not going to be a problem. But you really must make sure that however your fairly drastically modded suspension ends up, that the upper arms swing through an arc that wants to keep the inner and outer bolts parallel. If the outer end travels through an arc that makes that end's bolt want to skew away from parallel with the inner bolt, you will build up enormous binding and compressing forces in the bushes, chew them out and hate life. The suspension compliance can actually be dominated by the bush binding, not the spring rate! It may be the case that even something like the GKTech arm won't work if your suspension kinematics become too weird, courtesy of all the cut and shut going on. Although you at least say there's no binding now, so maybe you're OK. Seeing as you're in the build phase, you could consider using R33/4 type upper arms (either that actual arm, OEM or aftermarket) or any similar wishbone designed to suit your available space, so alleviate the silliness of the R32 design. Then you can locate your inner pivots to provide the correct kinematics (camber gain on compression, etc).
×
×
  • Create New...