Jump to content
SAU Community

Recommended Posts

Hey guys, i have been modding my rb25 vl calais for the past 6 months and what turned into a manual conversion ended being a whole rebuild. Manual conversion recently got completed so i sent it to workshop for FMIC, 550cc injectors, greddy plenum, rb25 neo hi-flow turbo, z32 afm, power fc. Turned out the hunk of shit had low compression, 90 in cylinder 3 and i think 120 in cylinder 4 and 5.

I would like to do a rebuild but not a crazy rebuild that will cost me like 10g, i was thinking pistons, rods and make head gasket. I have a little over 4 grand to spend. What should i be looking to get for this.

Car is not a daily driver.

Mate just got my 30/26 in my BT1 built by Red R Racing, highly recommend.

They have done quite a few builds for guys on here, check out NYTSKY's and murrayis threads just to name a couple on the go at the moment. They also built Mercury Motorsport's 1071awhp R34, absolute weapon as well as their 9 second street GTR 'twoogle'.

email paul at [email protected]

Edited by Supa Steve

does the car run? was it running before you took it to the workshop?

i would get a 2nd hand motor from a wreckers or on this forum, will work out heaps cheaper, and wont take long to do,

building a motor sounds all well and good, i have 4g i want pistons 1200 headgasket 300 all the little gaskets etc 100+ bearings 300, machine work 2500 and then the killer is labour, taking it in and out 400 ish, building the motor 1000.

adds up really quickly, trust me

SPOOLIMPORTS.COM.AU SELL GOOD REBUILD KITS.

AS DOES HORSEPOWER IN A BOX. IF U GO TO GOOGLE AND TYPE RB25 REBUILD KITS MANY PAGES WILL COME UP.

4K SHOULD JUST CUT IT...PROBS CLOSER TO 5K

4k won't get you much.

Best to buy a motor from a wrecker (do a compression test first) and throw that in. You wont need the whole forged internals for a highflow rb25 turbo and 550cc injectors, sure forged is better, but it's costly.

Anyone who's actually built a motor in their car will agree.

4k won't get you much.

Best to buy a motor from a wrecker (do a compression test first) and throw that in. You wont need the whole forged internals for a highflow rb25 turbo and 550cc injectors, sure forged is better, but it's costly.

Anyone who's actually built a motor in their car will agree.

AGREE 10000%

Standard Internals ftw!

If the 25 is dead than it is the perfect excuse to drop a RB30 back in and slap the 25 head on, a RB30 with a set of cast pistons, new rings and bearings will easy last years and years with a highflow turbo on the side.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...