Jump to content
SAU Community

Recommended Posts

Hi all. Just after peoples opinions here. Personally not a fan of them, but the reason I'm looking into it is to lower my fuel pressure. I have an in cabin gauge, with factory pump, injectors and tune, runs at 42psi on idle. A while ago I set my bosch 044 up intank and it was running 56psi at idle. I changed back to factory pump for the mean time. Wanted to sort some other issues parts etc. Now I'm gearing up to put pump back in along with some 600cc inj, but was thinking i mite need to put a reugulator in the mix to get pressure back down to 42mark. I'm looking at getting a nismo regulator, mostly for the ease of installation, and not having a remote mounted one. Now should i be worrying about doing this or, simply run at the 56psi? thanks for any input help guys.

Link to comment
https://www.sau.com.au/forums/topic/340166-adjustable-regulator-query/
Share on other sites

Hi all. Just after peoples opinions here. Personally not a fan of them, but the reason I'm looking into it is to lower my fuel pressure. I have an in cabin gauge, with factory pump, injectors and tune, runs at 42psi on idle. A while ago I set my bosch 044 up intank and it was running 56psi at idle. I changed back to factory pump for the mean time. Wanted to sort some other issues parts etc. Now I'm gearing up to put pump back in along with some 600cc inj, but was thinking i mite need to put a reugulator in the mix to get pressure back down to 42mark. I'm looking at getting a nismo regulator, mostly for the ease of installation, and not having a remote mounted one. Now should i be worrying about doing this or, simply run at the 56psi? thanks for any input help guys.

The 044 is overloading the return flow rate of the std regualtor the problem with this is that you will have varying fuel pressure under light load. THis is about the only time I would recommend using an aftermarket item - not sure if the nismo's have that much more return flow rate then the factory item, a sard will work fine tryed and tested.

Thanks for that guys. i do have another factory regulator there so will test that and pump again. So it's likely a regulator fault, but is it odd that it only shows as a problem with the bosch pump? I have no issues with factory setup in there. or is it just the extra flow/pressure that causing the greif? Also if the other reg doesn't resolve my issue, people recomend not buying a nismo regulator? Thanks

could be opening far enough for the standard pump but jams before opening far enough to hold 42psi with the 044 as it flows a lot more than the stocker.

not sure bout the nismos but cant see it having any trouble. if you do go an aftermarket reg make sure its a quality one like nismo, tomei etc. i have a tomei reg and it works perfecly

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...