32 Gtr V-spec

[yohoRB26]

hi all, few months ago i purchaced a clean as r32 gtr v-spec 93 model. It came with 18 inch bbs wheels, usual brembos , thicker strut braces, full exhaust from front pipe back, and awesome Aragosta coilovers :).

So far all iv done is replace the spark plugs, all bushes are new and compression check the motor which came up all really close, and remove the boost restrictor which suprisingly made a nice difference Next mod im getting is some dba motorsport slotted disks and project mu pads, then some front camber arms:)

At the moment im looking at getting a new frontpipe and some aftermarket split dump pipes while im in there. Was wondering if anyone knows of a brand of front pipe which sits relatively high under the chassis and doesnt cost a fortune?? Not after titanium as its way to $$$. The front pipe i have at the moment sits a bit on the illigal side and im not after anymore defects.

Im also chasing some nismo LMGT1, LMGT2, LMGT4 or BBS-lm wheels as id love to be running a set of any of these in 18x10 but they seem real difficult to come across a decent set in gtr size.

Also wondering if anyone knows what benifits if any are to be had by getting a stainless steel exhaust manifold on the standard turbos.

heres a pic to show which i dont wanna have to wind those coilovers up despite the exhaust being 7 cm of the ground

[(OO)SKYLINE(OO)]

At the moment im looking at getting a new frontpipe and some aftermarket split dump pipes while im in there. Was wondering if anyone knows of a brand of front pipe which sits relatively high under the chassis and doesnt cost a fortune?? Not after titanium as its way to $$$.

- http://www.skylinesaustralia.com/forums/JJ...=gtr+front+pipe

$299 for Front Pipes.

+ I think it is $30 postage..?

Im also chasing some nismo LMGT1, LMGT2, LMGT4 or BBS-lm wheels as id love to be running a set of any of these in 18x10 but they seem real difficult to come across a decent set in gtr size.

- http://www.skylinesaustralia.com/forums/Ne...to-t337147.html

Brand new Nismo LM GT4 in Bronze. 18 x 10.5" +15. $4400.

Not the exact size you want but Aaron has more wheels in stock.

Also wondering if anyone knows what benifits if any are to be had by getting a stainless steel exhaust manifold on the standard turbos.

No point in changing the exhaust manifold if you are running stock turbos.

[yohoRB26]

thanks mate

[(OO)SKYLINE(OO)]