Jump to content
SAU Community

Recommended Posts

Im abit confused about the soild lifter type mentioning..

P90 are L28et ?

There is a head, or was a head in USA, a P90A which had hydraulic lifters (non adjustable) but they are useless today, because the lifter is no longer available if one fails and they were sealed and unserviceable.

Cheers, D

P90 with dished pistons are L28ET, P90 with flat-top pistons are L28E. Not very common here in Aus (but I have 2 of them :P ).

The P90 L28E was matched to the F54 block - which was the 'last hurrah' of the L-series sixes.

P90 with dished pistons are L28ET, P90 with flat-top pistons are L28E. Not very common here in Aus (but I have 2 of them :worship: ).

The P90 L28E was matched to the F54 block - which was the 'last hurrah' of the L-series sixes.

I have a F54 Block, but it's only got a N42 on it, Still looking...

I have the F54/P90 combination with flat top pistons, but the motor was imported out of Japan, as it also has the dual stage throttle body on the L28E manifold.

Depending on your application, the F54 block is not necessarily the best block for the job.

eg; the best block to use for the L31 build is the N42 and not the F54 as commonly thought. I have sonic tested 6 plus F54 blocks and if any were to be used in a plus 3.0mm overbore, the cylinder walls would probably have been porous. Hence why I decided to use my block with a max oversize bore of 1.0mm.

Any particular reason you want an F54/P90 combination?

Cheers, D

I have the F54/P90 combination with flat top pistons, but the motor was imported out of Japan, as it also has the dual stage throttle body on the L28E manifold.

Depending on your application, the F54 block is not necessarily the best block for the job.

eg; the best block to use for the L31 build is the N42 and not the F54 as commonly thought. I have sonic tested 6 plus F54 blocks and if any were to be used in a plus 3.0mm overbore, the cylinder walls would probably have been porous. Hence why I decided to use my block with a max oversize bore of 1.0mm.

Any particular reason you want an F54/P90 combination?

Cheers, D

No, I'm just after a P90,

I have 2 x L28 engines, ones a F54, the other N42,

neither have a P90 (both have N42) Heads,

I'm after the P90 to turbo it, I've been told the N47 would not be a good combination on a L28 block, but it works good on my L24.

Nigel

Have you thought of using one of your N42 heads?

Valves are heaps easier to get out of USA, both standard & oversize.

If your going to have flat top pistons your compression is going to be far to high to turbo, but with dished standard 280zx turbo pistons it would be good, just cant put over a bar of boost into it. If you build this engine right, you wont need anymore that 10psi max.

I'm building an L28ET motor. F54/P90 combination with just under 9:1 compression I'm expecting about 250RWHP, but over 500Nm of torque on under 10psi and with our cars weighing a miserly 1250 odd kg, that is going to be a handful in anybodies language.

Cheers, D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...