Jump to content
SAU Community

Rb26 Built Engine Makes 351kw @ 28psi On Hks Gtss Tomei Cp Pistons

Angus Smart
 Share

Recommended Posts

Angus Smart Grand Master

Angus Smart

Posted
Posted

Cp Pistons,

Tomei rods

Arp studs throughout,

Tomei cams 260degree 8mm or there abouts, complete rebuilt head valves etc looks brand spanking new inside.

Jun oil pump

660cc injectors Denso purple in colour (may separate)

Hks Gtss turbos (may separate)

Bolt in and drive package has roughly 5000km's on it, you can lean on the motor alot more, 500kw is possible with the right fuel and turbo setup.

looking for $12000ono including everything above, can also include maf style power fc with the 351kw tune.

Selling so i can finish off my bigger on going build. Located in Sydney.

motors been pulled from car, i can give you compression on all cylinders and leak down test if you wish have all the equipment here.

will get some photos up in the next few days.

Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted

Would rather move it as a whole but can see someone not wanting the gtss turbos.

probably around $2200. they are pretty new! or would like to swap someone for gtrs if possible

  • 2 weeks later...
Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted

Compression & Leakdown test will be done tomorrow!

will post up results for everyone! only doing this for the buyer, i know the engines good!

:D

Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted

OK so i forgot to the the compression test but can rig up something soon with the starter motor back on to do that if need be..

i did however have a crack at the leak down test, however #4 was being an ass as i couldnt get tdc perfect and it kept spinning the motor.. so it will hold pressure a little lower dew to alot lost from the compressor.

Cylinder 1

http://www.youtube.com/watch?v=72yTLYwm8Wo

Cylinder 2

http://www.youtube.com/watch?v=uZNoBaQqg04

Cylinder 3

http://www.youtube.com/watch?v=J8_BFx81li8

Cylinder 4

http://www.youtube.com/watch?v=gVqt_ZAoAoQ

Cylinder 5

http://www.youtube.com/watch?v=ijZ_xHbwDlA

Cylinder 6

http://www.youtube.com/watch?v=OpfIsb7AA0g

And a quick photo of the Honing still well intact on the bores!

post-31456-1288688877_thumb.jpg

Angus Smart Grand Master

Angus Smart

Posted
  • Author
Posted

And finally some photos..

New gaskets, head to sump oil return, and new block plugs as you can see. its not been used much at all! its very fresh!!

post-31456-1288838417_thumb.jpgpost-31456-1288838430_thumb.jpg

post-31456-1288838449_thumb.jpgpost-31456-1288838464_thumb.jpg

Open to reasonable offers!!

The turbos are no longer available with the motor!!

  • 3 weeks later...
The Bogan Grand Master

The Bogan

Posted
Posted

Dont break this one ; )

Me needs some bloody good "street tyres" if Im gonna not make a fool of myself, are M/T ETs street tyres ? LOL

But then me has more cubes

RWD FTW

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • Kinkstaah
      My BMW 335i

      By Kinkstaah · Posted

      I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...