Jump to content
SAU Community

Recommended Posts

These are left overs from the R33 Gtst.

#1 6-Boost Split Pulse T4 Flanged Exhaust manifold to suit Rb20 and Rb25 Heads, with 44mm Tail gate flange, Good condition - $600

#2 - MHI TD07S turbo, allegedly modified with Garrett bits, but I pulled the housings off and its not modified, so no fancy Garrett wheels etc

Similar flow capacity as a GT35R so will make ~400rwks with the right amount of work done. has a 14cm^2 rear housing on it, twin scoll t4 flange. previous sale ads are below, but as I said the turbo is not modified.

See Here

And Here

After $600 for it.

#3 Micro Tech LT-12S, with plug in board to suit R32 R33 skylines, Was on a R32 GTR before I bought it, it did run my RB25 but wasnt tuned. After $650, comes with 4 line hand controller and serial cable.

#4 Standard Manual ECR33 Gtst Ecu - $50 bucks

#5 Greddy Emanage ultimate With N-4 Plug in Harness to Suit 32/33 skylines, will run both GTR and Gts/Gtst - $450

#6 Rb25 Block only, needs a rebore to 87mm, currently at 86.5mm comes with A/C compressor - $Free Come get it

#7 JJR 38mm External gate, silver colour, was working when I pulled it off the car - $50, comes with a length of pipe attached

Pics will be up tonight.

All prices are plus postage except the 25 block which is pick up only.

Cheers

Andrew

Link to comment
https://www.sau.com.au/forums/topic/341197-performance-gear/
Share on other sites

Also remembered I have a Z32 AFM sitting here, the mesh is still there, I bought it 2nd hand, worked fine for the 2 days if was on the car.

Mega awesome price of $150 posted.

Guys, If you dont have the money to buy the things, please don't offer to buy it then tell me you don't have the cash after I've been ringing around getting freight prices.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • Remember this is 1988 tech.
    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
×
×
  • Create New...