Jump to content
SAU Community

Recommended Posts

http://news.ninemsn.com.au/article.aspx?id=8111831

Man leads police on wild chase

Several officers have been injured and police vehicles damaged when a driver menaced a motorist on a western Sydney motorway then tried to run from the law.

Police said a 19-year-old man was driving a Nissan Skyline on the M4 at Homebush at about 11pm (AEDT) on Saturday when another man, driving a Mitsubishi Lancer began tailgating his car, flashing his high beam lights.

The menacing behaviour continued for up to 30 minutes as the cars drove west along the motorway.

The 19-year-old man called police and was told to leave the motorway and make his way to the nearest police station, at St Marys.

When he stopped in King Street outside St Marys Police Station, the Lancer driver drove to the end of the road and performed a burnout, attracting the police's attention.

Officers directed the driver to stop but when he refused, they pursued him along the Great Western Highway before terminating the chase in Stafford Street, Penrith.

During the pursuit, the driver collided with a trailer towed by a car at the intersection of the Great Western Highway and Parker Street at Penrith.

No one was injured.

A short time later, police patrolling in York Road at nearby Jamisontown saw the Lancer being driven erratically and overtaking cars on the wrong side of the road.

They followed the Lancer into the dead end Regentville Road where they positioned their two unmarked police cars to stop the driver.

But, instead of stopping, the driver drove between the cars, crashing with both, before travelling onto Tench Avenue, prompting a second police chase.

In Jeanette Street, Regentville, the motorist did a U-turn and drove directly at three pursuing police cars causing substantial damage to all of them.

The man then repeatedly reversed and accelerated towards the police cars while officers tried to remove him from his car, using capsicum spray to subdue him.

A 23-year-old Riverwood man has been charged with 16 offences.

They include: drive dangerously, menacing driving, perform burnout and drive vehicle recklessly/furiously, stalk/intimidate to intend fear of physical/mental harm, use weapon to avoid apprehension, refuse to undergo breath test, intimidate police and common assault.

His licence has been suspended and his car confiscated.

A 16-year-old was also arrested but later released without charge.

A number of officers who were in the police cars involved in the incident suffered minor back injuries and bruising but none required medical treatment.

Four police cars were damaged in the incident.

Link to comment
https://www.sau.com.au/forums/topic/341639-man-leads-police-on-wild-chase/
Share on other sites

So in the title of this thread you have "19-year-old man was driving a Nissan Skyline".....now putting that in the thread title makes it sound as if the guy driving the Skyline was the culprit....

Yes what a dickbrain lancer driver....must have been high on drugs or something at the time to ram and mangle 4 police cars....

So in the title of this thread you have "19-year-old man was driving a Nissan Skyline".....now putting that in the thread title makes it sound as if the guy driving the Skyline was the culprit....

Yes what a dickbrain lancer driver....must have been high on drugs or something at the time to ram and mangle 4 police cars....

lol I know its a misleading title & I was thinking the same thing about the skyline driver being the culprit when i read it im surprised at the media for once the skyline wasnt labeled.

lol I know its a misleading title & I was thinking the same thing about the skyline driver being the culprit when i read it im surprised at the media for once the skyline wasnt labeled.

The media did label the skyline.. the article heading was more than enough.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just as a thought, if it's in neutral, thats your drive line disconnect, not the clutch. Clutch slip at the dyno with pedal fully out, is actually adding a second disconnect. So it's not a clutch issue if you're in neutral. Just a bit of friction dragging the output around while in the air.
    • The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
×
×
  • Create New...