Jump to content
SAU Community

Recommended Posts

Hay guys Looking at selling my GTR.

Dont really drive it anymore and i feel its wasted.

Everything about this car has been upgraded, Super Fast car with heaps more potential, power has been limited to 350 hp while the engine is fresh, engine and components have only done 5000klm with the gearbox and diff doing a bit more with 15,000 klm. The Car runs a Garret Ball Bearing TO4z high mounted with full 3.75" HKS exhaust (Very Quiet) with a high flow 3.5" cat, has upgraded fuel system with 780cc injectors being feed from a custom twin entry fuel rail, fuel is pumped by a bosh 044 pump and is regulated with a Sard Fuel pressure regulator. The engine is controlled by a VIPEC engine managment system tuned to 15 psi by Mark Jacobson From Godzilla Motor Sport. The car has a full respray in Pale Blue Effect (From 2006 Toyota Corolla) and a standard gtr body kit (not including the wing). It has a Kenwood 7" fold out DVD player and alpine V12 amp with fusion speakers. The Wheels are FZERO Special -Volk rays 18" x 10" and are wrapped in falken 275,35,18. The Suspension is Tein hight adjustable and quite stiff. 4500k Full HID Xenon head light kit has just been installed.

A Full List of Mods and engine work that has been carried out can be emailed to any one that is more interested.

All Offers Considered.

Car can also come with defi boost gauge. Also has a trust extended sump and r33 gtr front diff, currently not on the car but can go with it for a small price.

Im asking for $22500 ono.

Ive spent alot more than that on this car but its time to move on.

You can email me at [email protected]

Or PM me....

post-38590-1287906798_thumb.jpg

post-38590-1287906928_thumb.jpg

post-38590-1287907029_thumb.jpg

post-38590-1287907072_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/341666-r32-gtr/
Share on other sites

  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...

Hay bud, will get some more pics when i finish putting the cooler and piping in.

running 350hp atw,, that was the run in tune, but pulls harder than that now,

if you want full specs i will email it to you.

PM me your email

Link to comment
https://www.sau.com.au/forums/topic/341666-r32-gtr/#findComment-5659675
Share on other sites

  • 4 weeks later...
  • 4 weeks later...
  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...